25  ℃ /  min。  The  results  also  showed that  three  kinds  of  raw material  bamboo shavings

combustion performance of the best, followed by sawdust, rice husk of poor combustion performance。

Second, determine the size and heating rate after five experiments using three different blending ratio of raw material to the experimental study of combustion mixing。 Experimental results show that the addition of biomass greatly improve the overall performance of coal combustion, biomass combustion characteristics significantly better than coal, the ignition temperature of the mixture of coal and biomass combustion ignition temperature approaching。 With the blending ratio increases, the ignition temperature and burn mixed coal combustion temperature decreases。 Integrated Combustion Characteristics of bituminous coal and anthracite separate combustion index was 5。70 × 10-7  and 2。50 × 10-7, with coal and    biomass

blending ratio increases, the composite index of the combustion characteristics linear increase in biomass and pulverized coal blending ratio of 1: 1, the raw material for pulverized coal promote more obvious。 Different types of biomass and coal co-combustion of coal combustion characteristics can be improved, but the degree of improvement is inconsistent different biomass to coal。 At the same heating rate, when the blending ratio of 1: 1, the maximum value of two kinds of biomass co-firing pulverized coal blended combustion characteristics of composite indices are: bamboo shavings and co-firing bituminous coal combustion characteristics comprehensive index was 7。93 × 10-6, sawdust mixed with anthracite-fired combined combustion characteristics 4。25 × 10-5。 Therefore pulverized by the respective optimum blend of biomass。 Shenhua bituminous corresponds bamboo  shavings, and sawdust Yangquan anthracite corresponds。

Keywords: biomass; mixed combustion thermogravimetric analysis; comprehensive combustion performance

第一章 绪论 1

1。1 生物质特点 1

1。2 生物质能利用转化技术及现状 3

1。2。1 生物质能利用现状 3

1。2。2 生物质能利用转化技术 4

1。3 国内外混煤研究现状及技术 5

1。3。1 国外生物质混煤研究现状 5

1。3。2 国内生物质混煤研究现状 5

1。3。3 生物质混煤燃烧技术 5

第二章 实验系统和实验方法 6

2。1 原料选择与制备 6

2。2 原料性质分析 7

2。3 实验仪器、设备 7

2。3。1 热重分析仪 7

2。3。2 热重实验目的与作用 9

2。3。3 差热分析仪实验方法

上一篇:航空用15CDV6钢的组织和性能研究
下一篇:阳极支撑与阴极支撑管式固体氧化物燃料电池性能的对比分析

生物质纳米材料的结构和物理性能

生物质材料对冶金废水中Cr(Ⅵ)吸附性能研究

新型生物质面膜的构建及其性能研究

自蔓延燃烧法制备超细Z...

甘氨酸燃烧合成法抗Cr毒化...

化学链燃烧技术中铁基氧...

生物质复合材料制备的溶解技术研究

提高小學语文課堂朗读教...

《水浒传》中血腥暴力研...

浅析施工企业保理融资成...

从企业eHR建设谈管理信息...

高效课堂教师问卷调查表

遥感土地用变化监测国内外研究现状

MNL模型历史城区居民活动...

大规模MIMO系统的发展研究现状

小型通用机器人控制系统设计任务书

PCI+PID算法直流力矩电机速...