高强铝合金多层结构整体钎焊过程流场模拟研究
关键词 高强铝合金 多层结构 钎焊 数值模拟 温度场 流场
毕业设计说明书（毕业论文）外文摘要
Title The simulation research of flow field during the brazing process of whole multilayer structure of high-strength aluminum alloy
Abstract
Based on multi-layer high-strength aluminum alloy structure overall brazing principle research, high strength aluminum alloy was established based on scaled fem software ANSYS，and in view of the high strength aluminum alloy multilayer structure model of brazing temperature and flow fields are simulated。In the process of numerical simulation,the transient temperature field and flow field distribution of LF21 high strength aluminum alloy brazing process which under different brazing temperature and holding time were respectively obtained.According to the result of simulation analysis,high strength aluminum alloy around the multi-layer structure model of high temperature solder melting earlier,and in the middle of the low temperature solder haven't melt.The higher brazing temperature within a certain scope, the longer time of heat preservation, the center of the finite element model of high strength aluminum alloy LF21 temperature distribution in the area is smaller, the temperature gradient. Liquid solder the average flow velocity, the greater the flow velocity distribution more uniform, the smaller the velocity gradient and flow the rule, is expected to soldering effect is best.
Keywords high strength aluminum alloy multilayered structure brazing the numerical simulation the temperature field the flow field
目 次
1.1 课题背景与意义 2
1.1.1 课题背景 2
1.1.2 课题意义 3
1.2 高强铝合金的研究现状 3
1.3 高强铝合金的焊接方法 4
1.3.1 高强铝合金的焊接方法 4
1.3.2 高强铝合金的焊接特性 4
1.4 高强铝合金的真空钎焊 4
1.4.1 真空铝钎焊原理 5
1.4.2 真空铝钎焊设备 5
1.4.3 高强铝合金钎焊工艺流程 6
1.4.4 真空铝钎焊的焊接特性 6
1.5 焊接有限元模拟研究概况 7
1.5.1 国外焊接数值模拟概况 7
1.5.2 国内焊接数值模拟概况 8
1.6 有限元软件ANSYS简介 8
1.7 本课题研究内容 8
2 LF21高强铝合金钎焊有限元模型建立 10
上一篇：铝复合材料熔焊工艺试验与性能分析