摘要本文通过固相法对一种新型材料 Cu0。3Ti2。1Nb0。6O4 的微波介电性能进行了研究。 该合成材料为致密的四方晶系金红石型结构,在 950-1000 摄氏度下烧结时间为 2-8 小时。其微波介电性能主要由样品的致密程度以及烧结条件决定的。另外,向 Cu0。3Ti2。1Nb0。6O4 分别添加为 Cu0。3Ti2。1Nb0。6O4 质量分数 2%、4%、6%、8%的玻璃粉以 降低其烧结温度并增大其介电性能,将纯 Cu0。3Ti2。1Nb0。6O4 粉料以及混有添加剂玻璃 粉的 Cu0。3Ti2。1Nb0。6O4 粉末制成的样品分别在 925℃、950℃、975℃、1000℃、1025℃

下保温 5h。实验表明,相同玻璃粉质量分数条件下,975℃、1000℃下烧结的样品的 介电性能最好,介电常数最高可达 117。63。相同烧结烧成温度条件下,质量分数为 2%、4%时制备的样品介电性能最好。试样中介电常数最高的质量分数为 4%在 1000℃ 下保温 5h 所得到的样品。即,当 Cu0。3Ti2。1Nb0。6O4 掺杂质量分数为 4%的玻璃粉并在 1000℃下保温 5h 烧结后的介电常数为 117。63。78236

毕业论文关键词:Cu0。3Ti2。1Nb0。6O4;硼硅玻璃陶瓷;介电性能常数;微波介质陶瓷

Abstract A new microwave dielectric ceramic Cu0。3Ti2。1Nb0。6O4 was synthesized by the solid-state route and the microwave dielectric properties were written in the paper 。The microwave dielectric ceramic material has the structure of single tetragonal rutile,it can  be

sintered in the  temperature of  950-1000℃ for 2-8h。The microwave  dielectric  properties

depends on the densification and the sintering condition of the specimens。In addition, put 2%, 4%, 6%,or 8% of glass powder into Cu0。3Ti2。1Nb0。6O4powder。Then put the samples

under925℃、 950℃、975℃、1000℃ or 1025℃ for 5 hours ,then make the samples

furnance cooling。It’s suggested that the specimens sintered at 975℃ or 1000℃ has the highest dielectric properties under the same ratio of glass powder。It’s also proved that under the same sintering temperature,the samples whose ratio of glass powder is 2%or  4%

has the best dielectric properties。The sample which was sintered under 1000℃ and the

ratio of glass powder is 4% has the highest dielectric properties of 117。63。

Keywords:Cu0。3Ti2。1Nb0。6O4、boron silicon ceramics、microwave dielectric properties、 microwave dielectric ceramic

目录

第一章 绪论 1

1。1  微波介质陶瓷的概述 1

1。1。1  微波介质陶瓷材料所需要具备的性能 2

1。1。2  微波介电陶瓷的分类 2

1。1。3 Cu0。3Ti2。1Nb0。6O4 作为微波介质陶瓷材料的优势 3

1。2 多层片式陶瓷电容器(MLCC)技术的概述 3

1。2。1 MLCC 的基本结构 3

1。2。2 MLCC 的优点 4

1。2。3 MLCC 的起源与发展 4

1。2。4 应用于 MLCC 技术中的介质材料应有的功能 5

1。3 低温共烧陶瓷(LTCC)技术的概述 5

1。3。1 LTCC 技术定义 5

1。3。2 LTCC 技术的优点 6

1。3。3 LTCC 技术国内外研究近况 6

1。4  硼硅玻璃陶瓷的分类 7

1。5  高介电微波介质陶瓷的国内外研究现状

上一篇:小坡口埋弧焊剂配方设计与工艺试验
下一篇:电流促进Sn焊点液相外延生长与结构演化

聚硼硅氧烷对PC/PBT合金的阻燃作用

添加Ti改性热作模具钢实验室熔炼制度优化

药用玻璃包装材料湜保证...

玻璃钢管道的技术特点及...

玻璃纤维―橡胶复合材料...

玻璃的分类【775字】

普通玻璃变成节能安全玻璃【1069字】

提高小學语文課堂朗读教...

小型通用机器人控制系统设计任务书

PCI+PID算法直流力矩电机速...

遥感土地用变化监测国内外研究现状

大规模MIMO系统的发展研究现状

MNL模型历史城区居民活动...

《水浒传》中血腥暴力研...

高效课堂教师问卷调查表

浅析施工企业保理融资成...

从企业eHR建设谈管理信息...