本毕业设计课题为南京市某高校教学楼的建筑与结构设计。通过查阅相关资料和建筑设计规范手册,在考虑会所建筑布局、使用功能以及设计特点的基础上,确定建筑方案,绘制主要平面、立面、剖面的建筑施工图;根据建筑方案进行结构设计,完成了三层楼、楼盖的设计、一榀框架的结构设计,以及一部主要楼梯的结构设计,绘制了相应的结构施工图;通过 PKPM 软件进行了结构的计算机校核,分析误差,并利用其导出数据进行了结构的基础设计,完成了相应基础施工图的绘制。60441   
毕业论文关键词 框架结构;建筑设计;结构设计;地震作用;基础设计;PKPM 软件 
 Title    Architectural and Structural Design of a Community     Chamber in Nanjing 
Abstract Architectural and structural design of a university teaching building in Nanjing was finished in this paper. Firstly,  given the architectural layout, usage  function, and the characteristics of the design, the architectural scheme is determined with the help of related information and architectural design code. And the main ichnography, stereograph and profile  construction  drawings were finished;Secondly, on the basis of the architectural design, the structural designs of a floor slab and a frame as well as a major staircase are accomplished. Meanwhile, the corresponding structural construction shop drawings are drew; Finally, compared with the computer results with the help of the software PKPM, the error is checked and analyzed.  Utilizing the data resulted from PKPM, the  foundation design of the structure was accomplished and the foundation construction drawings are also drawn. 
Keywords  Frame structure; Architecture design; Structure design; Earthquake effect; Foundation design; PKPM software  

目   次 

 1  工程概况 1 

2  建筑设计说明 1 

2.1  建筑略图… 2 

3  结构设计说明 1 

3.1  结构设计与分析概述… 3 

3.2  设计内容4 

3.3  设计准备4 

4  三层楼盖设计…4 

4.1  楼盖设计4 

5  框架结构计算…15 

5.1  结构布置及计算简图的确定15 

5.2  荷载计算16 

5.3  内力计算20 

5.4  内力组合39 

5.5  截面设计48 

5.6  PKPM 电算校核63 

6  楼梯设计…65 

6.1  设计资料65 

6.2  楼梯结构设计65 

7  基础设计69 

7.1  设计资料69 

7.2  基础设计…69 

7.3  连梁设计…71 

结论 …74 

致谢 …75 

参考文献…76 

附录 A 建筑平面缩略图77 

1  工程概况 本工程为南京市某高校教学楼。建设地点位于南京;建筑面积3000m2;结构形式为现浇钢筋混凝土框架结构,主体部分四层,局部二层,无地下室;建筑耐火等级为二级,设计合理使用年限为 50 年。 建筑结构安全等级为二级,三级框架,抗震设防烈度为 7 度,设计分组为第一组,设计基本地震加速度值为 0.10g;地基基础设计等级为丙级。 建设场地位于光华路北侧,地势较平坦。根据南京地区地质图,场地无影响其稳定性的断裂通过。根据地质勘测报告,场地积岩为沉积岩,岩体完整性好,建设场地属基本稳定场地,场地土为Ⅱ类。 地基基础设计等级为丙级,岩土层自上而下为:  1 杂填土:褐灰色,松散,层厚0.5m。2 灰黄色粉质粘土:灰黄~褐灰色,硬塑,层厚4.0m。3 粉砂杂粉质粘土~粉砂:灰黄~灰色,硬塑,层厚 4.2~7.5m。选择选择 2 为基础持力层,承载力特征值220 akf kpa 。 设计应遵循相应的国家建筑与结构设计规范。

上一篇:钢结构单层厂房变压器装配车间扩建部分设计
下一篇:南京某公司办公楼建筑及结构设计

某会议综合楼的消防设计

海南省三亚市某综合购物广场的空调系统设计

南京某酒店暖通空空调工程设计

南京市某医院门诊楼空调系统设计

四层某校综合楼消防设计

天津市某社区文体中心能耗分析及节能研究

南通某煤炭码头结构设计研究+CAD图纸

高效课堂教师问卷调查表

PCI+PID算法直流力矩电机速...

《水浒传》中血腥暴力研...

浅析施工企业保理融资成...

遥感土地用变化监测国内外研究现状

提高小學语文課堂朗读教...

从企业eHR建设谈管理信息...

大规模MIMO系统的发展研究现状

MNL模型历史城区居民活动...

小型通用机器人控制系统设计任务书