摘要为了掌握施放条件对全氟己酮灭火剂熄灭B类火焰效果的影响规律,设计并搭建了由灭火瓶、灭火剂释放气动动力装置、灭火实验小室、实验数据测试系统等构成的实验系统,采用控制变量法开展了全氟己酮灭火剂充装压力(1.2MPa、2.5MPa)、喷口面积(3个面积)对熄灭B类火焰效果的系统实验。结果表明,在0.15充装比和1.2MPa、2.5MPa充装压力条件下,总喷口面积越大,施放时间越短,雾化效果保持良好,灭火时间越短;充装压力主要影响了灭火室内各处达到灭火浓度的时间和灭火剂雾化效果,充装压力较高时,全氟己酮灭火剂施放流量较大,雾化效果较好,较快地达到灭火浓度并熄灭B类火焰。19347
关键词    全氟己酮  充装压力  喷口面积  灭火时间  雾化效果   
毕业论文设计说明书(论文)外文摘要
Title  A Study of Influence of C6-Fluoroketone-discharging Conditions on  Heptane Flame-extinguishing Effect                                                 
Abstract
To understand the influence of C6-Fluoroketone-discharging conditions on  extinguishing effect of heptane flame,a set of experimental system was designed and built, which is composed by fire extinguishing bottle, pneumatic equipment, fire extinguishing room and parameter-testing system. Systematic experiments were carried out with variable- controlling experimental method, which is related to the influence of both filling pressure and nozzle area on extinguishing effect of heptane flame. The results showed that the larger the total nozzle area was, the shorter the discharging time and fire extinguishing time were, and C6-Fluoroketone got good atomization effect when filling ratio of fire-extinguishing agent was 0.15 and filling pressure was 1.2 MPa or 2.5 MPa. The filling pressure has influence mainly on the time of which fire extinguishing room reaches fire-distinguishing concentration of the agent everywhere and on the atomization effect of the agent. The higher the filling pressure, the larger the flow of the agent was, the better the corresponding atomization effect was, the shorter the time of which fire extinguishing room reaches fire-distinguishing concentration of the agent everywhere was and heptane flame was distinguished.
Keywords  C6-Fluoroketone   Filling pressure   Nozzle area   Fire extinguishing time   Atomization  
 目  录
1  绪论    2
1.1  论文背景    2
1.2  全氟己酮灭火剂简介    4
1.2.1  全氟己酮的基本性质    4
1.2.2  全氟己酮灭火剂的灭火机理    4
1.2.2  全氟己酮灭火剂优点    5
1.3 全氟己酮施放条件研究现状    7
1.4 本文主要开展的工作    7
2  实验研究条件准备和方案设计    9
2.1  实验装置、仪器、药品    9
2.1.1  实验装置    9
2.1.2  实验仪器    13
2.1.3  实验药品    14
2.2  实验方法及方案    14
2.2.1  实验方法    14
2.2.2  实验方案    15
2.3  实验步骤    17
3  施放条件对全氟己酮灭火剂熄灭B类火焰效果研究    19
3.1  全氟己酮带料实验    19
3.2  喷头面积对全氟己酮灭火剂熄灭B类火焰效果的影响    21
上一篇:石墨烯填充橡胶复合材料的制备及性能研究
下一篇:热负荷200MW电厂复合空冷塔换热装置设计

有机无机阻控剂对Pb、Cd的吸附特性及差异

氧化石墨负载MOFs的制备及...

乳化粒子大小对乳状液流变及稳定性的影响

高温下NaOH和NaHSO3预处理对...

铁基非晶合金对偶氮染料褪色行为的研究

改性埃洛石对水中磺胺类...

粉煤灰微珠的表面优化及...

国内外无刷直流电动机研究现状

拉力采集上位机软件开发任务书

多元化刑事简易程序构建探讨【9365字】

浅谈传统人文精神茬大學...

中国古代秘书擅权的发展和恶变

高校网球场馆运营管理初探【1805字】

浅谈新形势下妇产科护理...

辩护律师的作证义务和保...

谷度酒庄消费者回访调查问卷表

《醉青春》导演作品阐述