摘要为研究热气溶胶灭火剂在不同条件下的扩散规律,本文以氧化剂+可燃剂+粘合剂体系的热气溶胶灭火剂为试样为基础,通过控制灭火器的施放角度、喷口口径、燃烧速率等条件进行灭火剂施放实验,并且利用温度采集系统、烟气分析仪和摄像机研究了热气溶胶灭火剂施放的过程。结果表明:该类型热气溶胶灭火剂灭火介质在喷射的过程中首先沿着喷射方向扩散,并伴随较强的上升趋势,之后逐渐向四周扩散沉降。施放角度较小时烟气快速上升扩散距离较近。喷口口径较小时,气溶胶粒子扩散速度快,动量大,不易受气流干扰改变方向,具有最佳的灭火性能。氧化剂含量越大,灭火剂燃烧速率越快,扩散能力越强。有火源的条件下,火源产生的热气流对烟气向上的扩散有着明显的影响。28571
关键词:灭火剂;热气溶胶;扩散特性;施放角度;喷口口径;燃烧速率
毕业论文设计说明书外文摘要
Title    The study about the diffusion characteristics  of aerosol fire extinguishing agent                                                 
Abstract
In order to study the diffusion law of the aerosol fire extinguishing agent, in this paper, the main formulation of the aerosol fire extinguishing agent is potassium nitrate,cyandiamide and phenolic.The experiment is conducted by controlling variable method. Controlling the fire extinguishers cast angle, nozzle diameter, burn rate and other conditions to do the experiment.We use the temperature acquisition system, flue gas analyzer and the camera to record the thermal aerosol fire extinguishing agent casting process. This thermal aerosol fire extinguishing agent has a strong upward trend in the injection process, and then gradually spread to the surrounding settlement. When casting angle is small, the smoke goes upward rapidly,and the distance of diffusion is small. When the nozzle diameter is small, aerosol has a high speed ,which is difficult to change direction by air turbulence.In this condition , the fire-fighting performance is best. The more oxidant the extinguishing agent contend,the faster the extinguishing agent burns,the stronger diffusion capacity is. Under the conditions with a fire source, the hot air produced by the fire have a significant impact on the diffusion of the aerosol.
Keywords  fire extinguishing agent; Aerosol; diffusion properties; cast angle; nozzle diameter; burn rate
目  次
1  绪论    1
1.1  研究的目的与意义    1
1.2  国内外研究现状    1
1.2.2 气溶胶灭火剂的研究现状    3
1.2.3气溶胶灭火剂扩散特性的相关研究现状    4
1.3  本文拟开展工作    5
2  实验设计    6
2.1  实验方案    6
2.2  实验装置    7
2.2.1 灭火实验室    7
2.2.2  温度采集系统    7
2.2.3 烟气分析仪    8
2.3  实验样品设计    9
2.4  实验方法    9
3  无火源时热气溶胶灭火剂扩散特性研究    11
3.1  气溶胶灭火剂灭火介质扩散特征    11
3.2  施放角度对气溶胶灭火剂扩散的影响    13
3.2.1  各施放角度下的扩散过程    13
3.2.2  根据温度场分析扩散现象    17
3.2.3  喷射角度改变的烟气分析    18
上一篇:聚合物溶液中阳极氧化和腐蚀技术的研究
下一篇:二羟基取代芳烃的硝化反应研究

油酸辅助水热法制备CaRE2(MoO4)4:RE3+荧光粉

CoCrCuFeNiMnX高熵合金热处理工艺研究

金属有机骨架材料Yb-MOFs制备单晶热重XRD表征

超分子有机膦酸钴(II)水热合成与表征

纳米Fe3O4纤维的制备及对高...

一维二膦酸镁(II)配位聚...

二维膦酸铜(II)的水热合成与结构表征

辩护律师的作证义务和保...

国内外无刷直流电动机研究现状

《醉青春》导演作品阐述

谷度酒庄消费者回访调查问卷表

高校网球场馆运营管理初探【1805字】

多元化刑事简易程序构建探讨【9365字】

浅谈新形势下妇产科护理...

拉力采集上位机软件开发任务书

中国古代秘书擅权的发展和恶变

浅谈传统人文精神茬大學...