摘要本文主要研究了阻燃剂种类及添加量对大豆蛋白胶黏剂阻燃性能的影响。把不同种类阻燃剂和胶黏剂进行混合制备阻燃胶黏剂,通过压制阻燃刨花板,研究了不同胶黏剂和阻燃剂对刨花板燃烧性能及力学性能的影响。我们以续燃时间和剩余长度等作为阻燃性能的参考指标,以弹性模量、静曲强度和内结合强度作为力学性能的参考指标。结果表明,阻燃剂a阻燃剂具有广泛性,阻燃性能最好,适用范围较广,阻燃剂b的阻燃性能也较好。但是无论哪种阻燃剂,加入后都会对板材的力学性能产生一定影响,并且不同种类的大豆蛋白胶黏剂与不同阻燃剂制备成的阻燃大豆蛋白胶会对刨花板力学性能产生影响的不同。30619
 关键词 大豆蛋白胶黏剂 刨花板 阻燃性 物理力学性能
毕业论文设计说明书外文摘要
Title   Study on flame retardant of soy protein adhesive 
Abstract
This paper was mainly discussed the effects of different kinds of flame retardants and different additive amount on the flame retardant properties of soy-bean protein adhesives. Different kinds of flame retardants were mixed with different kinds of soy-bean protein adhesive to prepare flame retardant adhesives. Then the adhesives were applied to produce flame retardant particleboard. The effects of different kinds of flame retardants adhesives on the flame retardant and mechanical properties were discussed. The flame retardant properties were based on burning time and the remaining length, and the mechanical properties were based on elastic modulus, static bending strength and internal bond strength of the particleboard. The results show that the first kind of flame retardant has extensive retardant performance for a wider application, and the second flame retardant performance is also good. But whichever kind of flame retardant would has an effect on the mechanical properties, and different soy-bean protein adhesives and different flame retardants have different effects on the mechanical properties of the particleboard.
Keywords   soy-bean protein adhesive  particleboard  flame retardant property mechanical property
目  录
1  引言    1
1.1  研究背景    1
1.2  阻燃剂的种类    1
1.2.1  卤系阻燃剂    1
1.2.2  磷系阻燃剂    2
1.2.3  氮系阻燃剂    2
1.2.4  氢氧化铝和氢氧化镁阻燃剂    2
1.2.5  有机阻燃剂    2
1.2.6  树脂阻燃剂    2
1.2.7  其他阻燃剂    2
1.3  阻燃机理    2
1.4  阻燃剂的加入方式    4
1.4.1  刨花干燥前加入    4
1.4.2  胶黏剂中加入    4
1.4.3  干燥机中加入    4
1.4.4  铺装机中加入    4
1.4.5  刨花板表面处理    4
1.5  研究现状    5
2  实验部分    7
2.1  实验材料    7
2.2  方案设计    7
2.3  实验方法与步骤    7
2.4  评价指标    7
2.4.1  阻燃性的评价指标    8
2.4.2  静曲强度和弹性模量的测试    8
2.4.3  内结合强度的测试    8
3  实验结果与讨论    10
3.1  阻燃剂的不同添加量对燃烧性能的影响    10
3.2  不同胶黏剂和阻燃剂对阻燃性能的影响    11
结  论    16
致  谢    17
上一篇:侧链型阳离子交换膜的制备与性能研究
下一篇:硝仿及其衍生物的合成与研究

预聚体分散水性聚氨酯胶黏剂的制备

水性聚氨酯胶黏剂的制备

膜孔蛋白OmpF表达与质谱分析

低温糊化淀粉胶黏剂的制备与应用研究

人肌肉浆网受磷蛋白Phos...

量子点标记的蛋白的吸附行为研究

多肽类表面活性剂在膜转...

谷度酒庄消费者回访调查问卷表

高校网球场馆运营管理初探【1805字】

浅谈传统人文精神茬大學...

拉力采集上位机软件开发任务书

浅谈新形势下妇产科护理...

多元化刑事简易程序构建探讨【9365字】

辩护律师的作证义务和保...

中国古代秘书擅权的发展和恶变

国内外无刷直流电动机研究现状

《醉青春》导演作品阐述