摘要:介绍了过去一些有关造纸黑液处理的工程工艺,结合造纸工业生产应用现状与发展趋势以及逐渐加强的环境保护意识, 按照国家和环保部门的要求,对造纸厂排放的污水,尤其是造纸黑液就行处理达标。通过对多种造纸废水处理工艺的查阅和对比,最终选择的处理工艺为“高效浅层气浮+水解酸化+生物接触氧化”。综合工艺处理后出水水质为COD<80mg/L,BOD<20mg/L,SS<30mg/L,色度达47.52,且经济合理。39058 毕业论文关键词:造纸;造纸黑液;浅层气浮;水解酸化;接触氧化
Design of process for handling black liquor of 100 million tons per year
Abstract:Introduces some of the black liquor processing engineering process, combined with the status quo and development trend of the paper industry production applications and the gradual strengthening of environmental awareness, In accordance with the requirements of national and environmental protection departments of the sewage discharge paper mills, especially on the line with black liquor treatment. Through looking up comparing with a papermaking wastewater treatment, finally choose the” Efficient Air Flotation+ Hydrolysis Acidification+ Biological contact oxidation”, and it can getCOD<80mg/L,BOD<20mg/L,SS<30mg/L, Chroma is 47.52,with economically and legitimately.
Keyword:Papermaking;Black liquor; shallow air flotation; acid hydrolysis; living being contact
目 录
1 绪论 1
1.1 前言 1
1.2 国内外造纸黑液现状 1
1.3现代造纸工业主要污染 4
2 造纸黑液处理工艺 6
2.1 造纸黑液的性质 6
2.2 工艺设计的原则和依据 7
2.2.1 工艺设计原则 7
2.2.2工艺设计依据 7
2.3 造纸黑液处理工艺 7
2.3.1 生物处理法 7
2.3.2 物理法 8
2.3.3化学法 9
2.3.4碱回收法 9
2.3.5物理化学法 10
2.4 造纸废水处理的研究方案 11
2.4.1气浮-接触氧化工艺 11
2.4.2水解酸化-好氧生物工艺 12
2.4.3混凝沉淀-A/O工艺 12
2.5 造纸黑液处理方案的确定 13
3 造纸黑液处理的工艺流程 14
3.1造纸黑液处理工艺流程 14
3.2 工艺流程说明 14
3.3 工艺设计说明 15
4工艺计算 17
4.1主要构筑物 17
4.1.1格栅 17
4.1.2集水池 19
4.1.3高效浅层气浮池 19
4.1.4水解酸化池 20
4.1.5接触氧化池 22
4.1.6二沉池 25
4.2黑液水质汇总表 28
5 结论 29
参考文献 30
致 谢 32