摘要细菌纤维素晶须(BCW)是细菌纤维素(BC)的衍生物,具有高结晶度、高聚合度、高持水量、高拉伸强度和生物相容性等优点,可作为功能填料用于补强高分子材料。本文采用硫酸水解法制备出长径比为80,结晶度指数93。3%的BCW,并选用丁苯橡胶(SBR)、羧基丁腈橡胶(XNBR)和天然橡胶(NR)作为基体,采用蒸发法制备BCW/橡胶复合材料薄膜,探究了胶种对BCW/橡胶复合材料薄膜水溶胀性能、水刺激-力响应性能、降解等性能的影响。结果表明:SBR复合膜的平衡溶胀率高达70%,远高于XNBR和NR复合膜;三种基体中, SBR和NR复合膜的水刺激-力响应性能好,其中NR复合膜的重复使用性能较好;另外, SBR和NR复合膜的降解速度比XNBR复合膜更快。76976

毕业论文关键词  细菌纤维素晶体 功能橡胶 水刺激-力响应性能

毕业设计说明书外文摘要

Title    The effect of the different rubber matrix on the properties of BCW/rubber films                   

Abstract As one of the derivatives of bacterial cellulose (BC), bacterial cellulose whisker (BCW) is qualified with high crystallinity, high degree of polymerization, high water holding capacity, high tensile strength and biocompatibility。 Thus, it is used as an ideal candidate for reinforcing polymer。 In this work, the BCW, consists of rod-like nanofiber with great aspect ratio of 80 and 93。33% crystalline, was prepared via sulfuric acid hydrolysis。 Styrene butadiene rubber (SBR), natural rubber (NR) and carboxylated acrylonitrile butadiene rubber (XNBR) were chosen as matrixes to prepare BCW/rubber films via evaporation。 The effects of different rubber matrix on the water swelling property, water-stimuli mechano-responsive property and degradation property were discussed。 The results showed that when 10 份 BCW was incorporated, the equilibrium swelling ratio of BCW/SBR films was 70%, which was higher than other films。 The water-stimuli mechano-responsive property of BCW/SBR films and BCW/NR films were more excellent and the reusability of BCW/NR films was the best among three rubber。 In addition, the degradation rate of BCW/SBR films and BCW/NR films were higher than that of BCW/XNBR films。

Keywords: bacterial cellulose whisker, mutifunctional rubber, water-stimuli mechano-responsive property

目   录

1  引言 1

1。1  细菌纤维素(BC) 1

1。2  细菌纤维素晶须(BCW) 2

1。3  BC和BCW在聚合物中的应用 3

1。3。1  生物医用材料 3

1。3。2  食品行业 3

1。3。3  纺织行业 3

1。3。4  聚合物材料增强领域 3

1。4  智能材料 4

1。5  本课题的研究意义和主要内容 4

2  实验部分 6

2。1  仪器与药品 6

2。1。1  实验药品 6

2。1。2  实验仪器 6

2。2  BCW及BCW/橡胶复合材料薄膜的制备 6

2。2。1  BCW的制备 6

2。2。2  BCW/橡胶复合材料薄膜的制备 6

2。3  表征与测试

上一篇:高透明性无色聚酰亚胺的制备与性能
下一篇:内酯香料的重要前体物4-羟基癸酸盐制备与表征

有机无机阻控剂对Pb、Cd的吸附特性及差异

氧化石墨负载MOFs的制备及...

乳化粒子大小对乳状液流变及稳定性的影响

不同前驱g-C3N4的制备及光催化性能研究

高温下NaOH和NaHSO3预处理对...

铁基非晶合金对偶氮染料褪色行为的研究

改性埃洛石对水中磺胺类...

高校网球场馆运营管理初探【1805字】

谷度酒庄消费者回访调查问卷表

浅谈新形势下妇产科护理...

国内外无刷直流电动机研究现状

辩护律师的作证义务和保...

浅谈传统人文精神茬大學...

多元化刑事简易程序构建探讨【9365字】

《醉青春》导演作品阐述

拉力采集上位机软件开发任务书

中国古代秘书擅权的发展和恶变