摘要无线通信技术作为一种有效的通信技术,目前已经被广泛地应用于生活中的各个领域与方面,比如Internet、手机通信、智能控制,商业发展等不同方面。由于无线通信存在着通信延迟大,通信的稳定性不高以及通信的质量不高等问题。人们通常采用分集技术以获得分集增益来应对无线通信过程中产生的多径衰落。86210

本文的主要研究工作是基于放大转发和解码转发这两种传输协议,使用单源单目标源多中继节点的两跳中继传输模型,针对部分中继选择以及全局中继选择这两种中继选择策略进行研究,并且考虑中继节点数目对于系统的中断性能的影响。

本文的结论为:采用同一转发协议,全局的中继选择策略相比于部分的中继选择策略的中断性能要好;解码转发的协议相比于放大转发的协议的中断性能要好;采用相同的中继选择策略,中继节点的数目在一定程度上越多,系统的中断性能越好。

毕业论文关键词:  协作通信;分集增益;中继选择策略;放大转发;解码转发

Abstract Wireless communication technology is an available communication technology。 At present, it has been widely used in the many fields and aspects in the daily life, such as, Internet, mobile communication, Intelligent control and business development。 Because of the large communication delay and not high stability of the communication and the quality of the communication, Diversity techniques usually are adopted to obtain persity gain to cope with multipath fading which processes in wireless communication procedure。 

In this paper, the main research considered the two relay selection strategy research of partial relay and global relay, and the number of relay nodes for the system outage probability based on the two transmission protocol of amplify-and-forward and decode-and-forward, using two hop relay transmission model consisting of single source, single target, multi relay nodes。

This paper’s conclusion: using the same forwarding protocol, the outage of global relay selection strategy is better than partial relay selection strategy。 Decode- and-forward protocol is better than amplify-and-forward protocol。 Using the same protocol and relay selection strategy, more number of the relay nodes in a certain extent, system interruption performance is better。

Keywords:Cooperative communication; Diversity gain; Relay selection strategy; Amplify-and-forward; Decode-and-forward

目 录

第一章  绪论 1

1。1 无线通信技术的发展和相关知识 1

1。1。1 无线通信传输中的多径效应 1

1。1。2 分集技术的分类与简介 2

1。1。3 终端工作模式 4

1。2 协作通信的产生与意义 4

1。3 选题的目的及其意义 5

1。4 国内外研究现状及存在问题 5

1。5 论文结构 6

第二章  中继选择及其相关基础知识 7

2。1 协作中继技术的主要优点 7

2。2 传输模型 8

2。2。1 三点两跳中继模型 8

2。2。2 多节点中继模型 8

2。2。3 四种中继传输方式 9

2。3 转发协议 10

上一篇:多小区协作大规模MIMO系统的能效优化
下一篇:Matlab小波分析用于图像压缩的研究

自回归模型谱估计方法设计+Matlab源代码

MATLAB舰船电能分配及管理系统设计

Matlab的光栅投影相位校正与展开算法设计

MATLAB数字图像处理的交通信号灯识别系统设计

基于MATLABGUI的粒子滤波算法实现+源代码

基于MATLABGUI的非线性卡尔曼滤波实现

水下激光通信中海水的散射模型及MATLAB仿真

大规模MIMO系统的发展研究现状

提高小學语文課堂朗读教...

遥感土地用变化监测国内外研究现状

从企业eHR建设谈管理信息...

《水浒传》中血腥暴力研...

浅析施工企业保理融资成...

高效课堂教师问卷调查表

小型通用机器人控制系统设计任务书

PCI+PID算法直流力矩电机速...

MNL模型历史城区居民活动...