摘要:本论文实验内容是微流控芯片控制单元的设计,微流体控制和驱动技术是微流控芯片(Microfluidic chips)发展和应用的关键技术之一,论文介绍了STC90C516RD+芯片并用该系列的51单片机的外部的独立按键选择和控制继电器开关继而电磁阀控制微流控芯片,实现对微流控芯片内的进样管道选择和流体控制。并在显示屏上显示。该系统结构简单、稳定可靠,适宜作为独立的系统实现微流控芯片的复杂控制。37793
 本课题较好地完成了预期的设想,设计并实现了系统的硬件电路,完成了系统软件的编写和调试。测试结果证明,达到了设计要求。
毕业论文关键词:微全分析系统;单片机;控制单元;
Design of control unit for Miniaturized total analysis systems
Abstract: In the research of the field of chemical and Life Sciences, the Miniaturized total analysis systems is a new and indispensable technology in these fields.. The experiment content is the design of micro fluidic chip control unit, micro fluid control and drive technology is micro fluidic chip (microfluidic chips) of the development and application of the key technology of, this paper introduces the chip stc90c516rd + and the series of 51 MCU external, independent of the key selection and control switch relay then electromagnetic valve control microfluidic chip, realize the pipe selection and control of fluids in microfluidic chip. And display on the display. The system is simple and stable, and is suitable for the complex control of the microfluidic chip..
This thesis completes the expectation, designs and realizes the hardware circuit of the system, and completes the writing and debugging of the system software.. The test results show that the design requirements.
Keywords:Miniaturized total analysis systems;Microcontrollers Unit;Control unit;
目录    4
1 绪论    7
1.1 研究背景    7
1.1.1 芯片实验室    7
1.1.1 微流控技术    7
1.1.2 微流控芯片    8
1.1.3 微流控芯片特点及运用    8
1.2 微流体驱动系统    9
1.2.1电渗驱动微泵    9
1.2.2 液体的蒸发和渗透驱动    10
1.2.3 电化学驱动泵    10
1.2.4 磁力驱动微泵    11
1.2.5 压电晶体驱动泵    11
1.2.6 气动微阀    11
2 本课题研究思路    12
2.1 研究思路    12
2.1.1 研究核心    12
2.1.2 研究意义    13
2.1.3 研究目标    13
2.1.4 研究思路    14
2.1.5 研究难点    14
2.2 研究工具    14
3 工作原理    15
3.1 微流控芯片    15
3.1.1 微流控芯片工作原理    15
3.2.1系统工作原理    17
3.2.2 系统构成    18
3.2.3 微流控芯片的制作    20
3.2.4 系统软件程序设计    20
3.2.5 进样驱动实验和流速分析    20
3.2.6 微流体运动状态分析    21
3.3 芯片及继电器资料    22
3.3.1 STC90C516RD+芯片资料如下:    22
3.3.2 继电器    23
3.4 软件资料    24
软件设计平台    24
软件设计思路    24
软件流程图设计    25
4 实验过程    26
4.1 单片机系统的测试与调试    26
4.2 实验结果    26
5 总结    28
上一篇:光学相干层析技术的生物医学应用
下一篇:小型共轴双翼直升机的硬件电路设计+PCB电路图

STC89C52单片机智能车红外避障控制设计

基于VC的分层AltaRica故障建模和分析

L型探针馈电微带天线的设计与分析

单片机双极性神经刺激脉冲发生器的设计

单片机的环境参数检测仪的设计+电路图

单片机的数字式电感电容表设计

STC89C52单片机的信号发生器的设计

《醉青春》导演作品阐述

国内外无刷直流电动机研究现状

高校网球场馆运营管理初探【1805字】

浅谈传统人文精神茬大學...

辩护律师的作证义务和保...

谷度酒庄消费者回访调查问卷表

浅谈新形势下妇产科护理...

拉力采集上位机软件开发任务书

中国古代秘书擅权的发展和恶变

多元化刑事简易程序构建探讨【9365字】