摘要根据相关研究,有超过一半的电源故障都是由于电解电容的老化失效引起,电解电容的故障成为影响电源故障率的最主要原因。为了能够有效的预测PFC变换器电路的工作状态,监测电解电容的寿命是十分重要的。通过监测电解电容的工作状态,计算电解电容的参数,构建数学模型,预测电解电容的寿命。来减少因为电解电容的故障而引起的PFC变换器的故障率。
在对电解电容器特性及PFC电路有了相关认识和知识基础的前提下,进行数学推算,得到电解电容参数ESR和C的变化关系,通过模拟电路,来构建SABER仿真模型。根据所提出的电解电容器参数数学推算结果,结合仿真实验,成功验证了方法的可实现性与正确性。 22963
关键词  电解电容器    BOOST PFC   SABER  数学推算
  毕业设计说明书(毕业论文)外文摘要
Title    monitoring studies of electroltic capacitors ESR and C in Boost PFC converter                              
Abstract
According to related research, more than half of the power failures are due to failures caused by the aging of the electrolytic capacitor. electrolytic capacitor failure become the most important reason for power failure rate.Can monitoring electrolytic capacitor life is very important for effectively predicting the operating state of the PFC converter circuit.By monitoring the working condition of electrolytic capacitors, we can calculate electrolytic capacitor paraments, construct a mathematical model to predict the life of electrolytic capacitors.Though this way ,we can reduce the failure of PFC converter because of electrolytic capacitor failure.
With relevant in the context of understanding and knowledge base of the characteristics of electrolytic capacitors and PFC circuit. using mathematical projections by the method of analog circuits to achieve,we obtain the ralationship between the parameters of electrolytic capacitor ESR and C and build SABER simulation model. According to the proposed mathematical projection results, combined with simulation experiment, successfully verified the feasibility and correctness of the program.
Keywords  Electrolytic capacitors BOOST PFC SABER  mathematical projection
目   次
1  绪论    1
1.1  研究背景与意义    1
1.2  本文主要内容和意义    2
2  电解电容器    3
2.1  电容器的基础知识    3
2.2  铝电解电容的基本知识    4
3 电解电容寿命    7
4  ESR与C    8
4.1 电解电容的等效电路    8
4.2  ESR的介绍    8
4.3  C的介绍    9
4.4 监测ESR与C的意义    9
5 boost与PFC技术    11
5.1  PFC技术简介    11
5.2  boost电路简介    11
5.3 基于Boost电路的PFC变换电路    12
5.4 PFC技术的意义    15
6  PFC电路中电解电容的参数测算    16
6.1 理论推导    16
6.2 创建仿真模型    18
7  Boost型PFC变换电路仿真电路设计    20
7.1 Boost型PFC变换电路主电路选择    20
7.2 Boost型PFC变换电路控制电路设计    20
7.3 Boost型PFC变换电路采样电路设计    22
8  Boost型PFC变换电路仿真实验    29
8.1 实验一:验证推导公式的正确性    29
上一篇:Z源变换器多载波控制策略设计+电路图
下一篇:三菱交流永磁伺服系统的应用研究

UC3875软开关全桥变换器设计Matlab仿真

自激式串/串(S/S)补偿非接触谐振变换器研究

串并补偿非接触谐振变换器的自激控制的设计

直流电网潮流计算方法+DCPFC仿真图+程序

DAB变换器的舰船中压直流...

Matlab模块化多电平变换器的控制策略研究

电感电流连续的Boost功率因...

国内外无刷直流电动机研究现状

高校网球场馆运营管理初探【1805字】

辩护律师的作证义务和保...

浅谈新形势下妇产科护理...

拉力采集上位机软件开发任务书

《醉青春》导演作品阐述

谷度酒庄消费者回访调查问卷表

浅谈传统人文精神茬大學...

中国古代秘书擅权的发展和恶变

多元化刑事简易程序构建探讨【9365字】