基于CAN总线的控制网络监控软件的研究
关键词 监控 ZOPC组态软件 MCGS组态 组态王软件
毕业论文设计说明书外文摘要
Title The research based on the monitor control software of the Controller Area Network
Abstract
KINGVIEW is a kind of software which can be used to design a monitor system.This article means to use CAN experimental box to design and complete the experiments of the digital input, digital output, analog input, analog output, frequency detection and temperature detection. So that we can understand the theory of CAN bus and be familiar with the software. And it will be useful to our study and works in the future. This article, in the first place, introduces the development and the feature of CAN bus. Then use CAN experimental box, ZOPC Serve software, MCGS software, KINGVIEW software to practice. In the experiment, not only introduce CAN experimental box, the construction and the functions of the communication protocols of the modules, but also the process of the debugging. The final part is the definite process of using KINGVIEW software to complete the experimental design work. The process includes using KINGVIEW software to set up the OPC server, so that we can convenient to use KINGVIEW software design the interface and monitor the data size. After so many times of debugging and the guidance of my professor, I hope I can complete the prospective targets.
Keywords monitor ZOPC Serve software MCGS software KINGVIEW software
目 次
1 绪论1
1.1 研究背景1
1.2 研究目的和意义1
1.3 国内外现状2
1.4 论文的组织结构3
2 CAN总线技术基础4
2.1 CAN总线简介4
2.2 CAN总线技术特点4
2.3 本章小结5
3 相关软件和硬件的介绍5
3.1 iCAN实验箱概述6
3.1.1 iCAN实验箱特点6
3.1.2 iCAN实验箱涉及内容7
3.2 iCAN协议规范7
3.3 实验软件介绍8
3.4 本章小结11
4 iCAN功能模块通信测试12
4.1 iCAN4050建立通信协议12
4.2 iCAN4017建立通信协议13
4.3 iCAN4400建立通信协议14
4.4 iCAN5303建立通信协议15
4.5 iCAN7202建立通信协议17
4.6 本章小结18
5 基于组态王软件设计监控软件19
5.1 国内组态王软件的简介19
5.2 基于组态王的开关量输入、输出19
5.3 基于组态王的模拟量输入22
5.4 基于组态王的模拟量输出23
5.5 基于组态王的频率检测24
5.6 基于组态王的温度检测与报警26
5.7 基于组态王的综合仿真27
5.8 本章小结29
结论 30
致谢31
参考文献 32
下一篇：柔性结构的建模及主动控制方法研究