摘要:配电网潮流计算作为配电管理系统高级应用软件功能组成之一,本课题主要分析了配电网的特点及对算法的要求,然后建立配电网潮流计算的数学模型。由于配电网的结构和参数在很大程度上区别与输电网,所以配电网潮流计算必须采用适当的计算方法。本文是采用了前推回代法对配电网进行潮流计算,文中对前推回代法的基本原理、收敛性及计算速度等进行了分析比较。前推回代法具有编程简单、计算速度快、收敛性好的特点。本文采用该方法设计潮流程序并且对以36节点的系统进行验证,计算结果表明该方法能充分考虑到负荷的三相不平衡的影响,有较好的运算速度和准确度。55455

毕业论文关键词:电力系统,MATLAB程序设计,三相潮流计算,前推回代法                            

Abstract: Power flow calculation of distribution network as a senior application software distribution management system, this paper analyzes the main features of distribution network and the requirements of the algorithm, and then the mathematical model to calculate the power flow based. Due to the structure and parameters of distribution network in a large extent and difference between transmission network, so the power flow calculation of distribution network must use the proper calculation method. This paper is the use of forward and backward substitution method for power flow calculation of distribution network, the forward and backward substitution method in this paper, the basic principle of convergence and calculation speed are analyzed and compared. With forward and backward substitution method is simple in programming, fast computation speed, good convergence characteristics. In this paper, using the method of design and verification flow program system with 36 nodes, the calculation results show that the effect of this method can fully take into account the load unbalanced, have better speed and accuracy                                                        

Keywords: power systems, phase decoupling, power flow, back/forward sweep algorithm

目 录

1.前言.4

1.1  配电网的分类和特点4

1.2  潮流计算问题的发展和配电网潮流计算的现状5

1.3  本设计的工作6

2.配电网潮流计算方法.7

2.1  配电网对算法的要求7

2.2  配电网潮流计算数学模型7

2.3  配电网潮流常用的求解方法7

2.4  本章小结.16

3.配电网三相解耦潮流17

3.1  电力系统中性点的运行方式.17

3.2  数学模型.19

3.3  配电网的相间解耦.20

3.4  算例.21

3.5  本章小结.22

总 结.23

参考文献24

1. 前言                                           

1.1  配电网的分类和特点 

配电网在电力网中起重要分配电能作用。 

配电网按供电区的功能来分类可分为:农村配电网、城市配电网、工厂配电网等。在网格系统的城市,网格是指在110kV及以上电压电力网络,主要起高压连接区域(220千伏及以上电网的影响)。配电网络是35KV及以下电网电压,给电力负荷供电的影响为每个配电站和不同的城市。

根据电压等级来分类可分为:高压配电网(35 –10kV )中压配电网(6–10kV,苏州有20kV的),低压配电网(220/380V),220kV电网也有配电功能,主要用在负载率较大的特大型城市。

上一篇:AT89S52单片机光伏发电系统中MPPT系统设计
下一篇:PLC的自动螺丝机硬件设计

单相电压型逆变电路的谐...

太阳能电站的自动跟踪系...

MATLAB变速恒频风力发电控制系统的设计

MATLAB动车组滚动轴承RBF智能诊断研究

基于磁共振技术的家用无...

UC3842本安电源设计MATLAB仿真+电路图

多无人艇协同目标跟踪MATLAB仿真+源代码

《水浒传》中血腥暴力研...

遥感土地用变化监测国内外研究现状

小型通用机器人控制系统设计任务书

提高小學语文課堂朗读教...

MNL模型历史城区居民活动...

高效课堂教师问卷调查表

从企业eHR建设谈管理信息...

大规模MIMO系统的发展研究现状

浅析施工企业保理融资成...

PCI+PID算法直流力矩电机速...