摘要本课题介绍了造纸厂工业废渣——造纸白泥的污染问题,利用造纸白泥中含有较多碳酸钙特性,将造纸白泥、粉煤灰和多种添加剂煅烧制成多孔陶瓷滤料。通过研究国内外在滤料吸附方向的发展状况,总结多孔陶瓷滤料除铜的机理和意义。本实验首先对滤料供碱释钙能力进行研究,通过控制不同投加量、不同初始pH、不同形状及不同温度来找出最佳供碱释钙条件。之后利用吸附法,研究不同投加量、不同铜浓度和不同温度对滤料除铜效果的影响。结果表明,造纸白泥:粉煤灰:磨细木屑:高岭土为50:40:5:5的滤料除铜效果最好,且滤料的形状尺寸、滤料的投加量、温度都会对滤料除铜效果产生影响。25398
关键词 造纸白泥 多孔陶瓷滤料 供碱释钙 吸附 除铜 毕业论文设计说明书外文摘要
Title Functional studies of anorthite ceramic filter material
Abstract
In this paper,the main studies were focused on the pollution of white clay which came from paper mills. Porous ceramic filter material can be made of white mud ,fly ash and a variety of additive because of the characteristic that there were much CaCO3 in white clay. According to the development of the filter material absorption at home and abroad, the mechanism and meaning of using porous ceramic filter material to remove copper were summarized.Firstly, in the study of the ability of releaseing alkali calcium from filter material, the best condition was found by controlling dosing quantity、initial pH、shape and temperature. Then the influence of different dosing quantity、copper concentration and temperature on the effect of releasing copper was observed. Finally,the results showed that the filter material which consists of 50% papermaking white clay、40% fly ash、5% ground granulated sawdust and 5% kaolin had the best effect on releasing copper. Also the shape of the filter material size,dosing quantity and temperature can affect the result.
Keywords Lime mud Porous ceramic filter material The release of Ca2+ and OH- Adsorption Removal of copper