摘要:钼酸盐基质的荧光粉具有良好的稳定性和发光性能,在应用上有很大的潜力。由于钼酸盐有较强的电荷转移跃迁带,Eu3+掺杂的钼酸盐荧光粉,可以有效吸收近紫外、蓝-紫光 LED 激发能量,并将吸收的能量传递给钼酸盐基体中的稀土离子,因而钼酸盐荧光粉是一种很有前途的红色荧光粉材料。钼酸锶钙红色荧光粉由于其成本低、晶体结构稳定以及在近紫外、蓝紫光区对光有良好的吸收,是一种新型荧光材料。本研究采用高温固相法向制备的荧光粉材料 Ca2SrMoO6中掺杂不同浓度的Eu3+制备出Ca2SrMoO6-Eu3+红色荧光粉,通过XRD、SEM、DSC 等方法研究了样品的结构、形貌和热性能,并使用激发-发射光谱研究了不同浓度 Eu3+掺杂的Ca2SrMoO6:Eu3+红色荧光粉的发光性能。56998
毕业论文关键词:红色荧光粉;钼酸盐;Eu3+离子;高温固相法   
Study on solid phase synthesis and properties of Ca2SrMoO6-Eu red phosphor 
Abstract:  The phosphor of molybdate matrix has excellent stability and luminescent properties,so it has  great potential in application.  Because of the special nature of molybdate, Eu3+-doped molybdate red phosphor can effectively absorb blue violet led emission spectra, and transfer to the doped rare earth ions in molybdate matrix and molybdate phosphors is a promising red fluorescent  powder materials.  Calcium molybdate red fluorescent powder due to its low cost, space structure is stable and in the ultraviolet and near ultraviolet region of light has good absorption and is a new kind of fluorescent powder.In this study, Eu3+ was prepared by using high temperature solid phase method to prepare the phosphor Ca2SrMoO6  doped with different concentrations of Ca2SrMoO6- Eu3+  red fluorescent powder, The effects of different concentration of Eu3+ on the phase and luminescence properties of phosphors were studied by XRD, excitation and emission spectra. The structure, morphology and optical properties of the prepared samples were characterized by scanning electron microscopy, XRD diffraction and fluorescence spectrophotometer. 
Keywords: red phosphor; molybdate; Eu3+ ions; solid state reaction 

目  录  

1 绪论 .  1 

1.1 荧光粉的发光过程 ..  1 

1.1.1 荧光粉发光过程的能量传递 ...  2 

1.2 双钙钛矿结构钼酸盐体系结构 ..  3 

1.3 双钙钛矿结构钼酸盐体系合成方法 ..  5 

1.3.1 高温固相法 ...  5 

1.3.2 溶胶凝胶法 ...  5 

1.3.3 化学沉淀法 ...  6 

1.3.4 水热法 ...  6 

1.4 钼酸盐体系红色荧光粉的特点 ..  6 

1.5 钼酸盐红色荧光粉的研究现状 ..  7 

1.5.1 碱土金属钼酸盐 ...  7 

1.5.2 稀土钼酸盐 ...  7 

1.5.3复合钼酸盐荧光粉   8 

1.6 Eu3+离子的发光特性    8 

1.7 本论文选题研究内容及研究意义 ..  9 

1.7.1 研究内容 ...  9 

1.7.2 研究意义 .  10 

2 实验部分 ...  10 

2.1 样品制备(高温固相法)   10 

2.2 实验所需仪器及设备  11 

2.3 Ca2SrMoO6-Eu3+

红色荧光材料的合成  ..  14 

2.3.1 实验准备 .  14 

2.3.2 实验过程 .  14 

2.4 样品表征   14 

2.4.1 荧光粉 Ca2SrMoO6-Eu3+的XRD 分析  ..  14 

2.4.2 荧光粉 Ca2SrMoO6-Eu3+的SEM 形貌分析 ..  15 

2.4.3 荧光粉 Ca2SrMoO6-Eu3+的DSC、TG图  ..  16 

2.4.3 荧光粉 Ca2SrMoO6-Eu3+的荧光光谱性质  .  17 

上一篇:不同Cr含量掺杂对LiFeBO3正极材料电化学性能的影响
下一篇:高铁用铜合金接触线强化机理研究

钽掺杂二硫化钼二维晶体...

甲氧基苯基卟啉衍生物的合成

纳米NCA正极材料的合成技术研究

有机硅丙烯酸树脂的合成及其性能研究

水性丙烯酸树脂的合成及改性研究

手性金属有机硅脂的设计与合成

均相体系中PVB的合成及表征

《水浒传》中血腥暴力研...

遥感土地用变化监测国内外研究现状

PCI+PID算法直流力矩电机速...

从企业eHR建设谈管理信息...

小型通用机器人控制系统设计任务书

MNL模型历史城区居民活动...

提高小學语文課堂朗读教...

浅析施工企业保理融资成...

高效课堂教师问卷调查表

大规模MIMO系统的发展研究现状