摘要在本论文中,首先采用溶胶凝胶法以间苯二酚、碳酸钠、水、甲醛为原材料经过水浴锅加热、炭化等工序制备出炭气凝胶,然后再通过浸渍法对其进行负载;利用紫外分光光度计检测了浸渍的炭气凝胶的吸附性能,利用SEM观察样品的形貌和粒径,利用XRD衍射仪对样品的晶型进行分析,利用紫外固体漫发射分析对不同波长范围内光的吸收强度等;结果表明TiO2为锐钛矿晶型,扫描电镜说明了铈、钕双掺杂TiO2/C复合材料的微观表面是有颗粒状物质组成的,铈、钕双掺杂TiO2/C复合材料在紫外光波660nm左右有强吸收峰,TiO2/C-Ce0%-Nd5%这个样品的光催化性能优异,紫外光的降解率最高达到99.65%,可见光降解率达到20.45%,即TiO2/C-Ce0%-Nd5%样品在紫外光的照射下对亚甲基蓝的降解效果显著。因此,铈、钕双掺杂TiO2/C复合材料可以用于废水处理以及相关的环境监测。62131

毕业论文关键词: 溶胶-凝胶法;炭气凝胶;光催化;亚甲基蓝

 Abstract In this paper, firstly using resorcinol, sodium carbonate, water and formaldehyde as raw materials by sol-gel method, after the water bath heating, carbonization process prepared carbon aerogels, and then through the impregnation method to carry on the load; The adsorption properties of the impregnated carbon gas gel were detected by UV spectrophotometer, the morphology and particle size of the samples were observed by SEM, the crystal form of the sample was analyzed by XRD diffraction, the absorption intensity and transmittance of light in different wavelength range are analyzed by ultraviolet solid diffuse emission and so on; The results showed that TiO2 was anatase, Scanning electron microscope shows that the micro surface of Ce and Nd doped TiO2/C composites is composed of granular materials.         Cerium and neodymium doped TiO2/C composites have strong absorption peak at about 660nm in the ultraviolet, The photo-catalytic performance of TiO2/C-Ce0%-Nd5% is excellent. photo-catalytic performance of TiO2/C-Ce0%-Nd5% is excellent, The UV degradation rate was 99.65%, and the visible light degradation rate reached 20.45%. TiO2/C-Ce0%-Nd5% samples under UV irradiation on the degradation of methylene blue effect is significant. Therefore, cerium, neodymium doped TiO2/C composite can be used for wastewater treatment and related environmental monitoring.

Keyword: sol-gel method; carbon aerogels; photo-catalytic; methylene blue.

目录

1 绪论 6

1.1  废水污染现状及处理方法 6

1.1.1  废水的污染 6

1.1.2 废水的处理方法 7

1.2 二氧化钛 8

1.2.1 光催化剂TiO2的性质 8

1.2.2 光催化剂TiO2的优缺点 9

1.2.3 光催化剂TiO2的用途 9

1.2.4光催化剂TiO2的应用 10

1.3 炭气凝胶 10

1.3.1 炭气凝胶的简介 10

1.3.2 炭气凝胶的制备过程 10

1.3.3 炭气凝胶的应用 11

1.4 本课题研究内容、目的及意义 12

1.4.1 本课题研究目的及意义 12

1.4.2 本课题主要研究内容 12

2、实验部分 13

2.1 实验所用原料及设备 13

2.1.1 实验用料

上一篇:45钢亚温淬火工艺参数对组织的影响
下一篇:Er/Ce共掺铋硼酸盐玻璃的光谱性质研究

钽掺杂二硫化钼二维晶体...

金属离子掺杂对三元电池材料的改性研究

碳掺杂对材料电化学性能的改性研究

金属氧化物掺杂C3N4/TiO2光...

B位Ir掺杂钙钛矿结构LaMn...

二氧化钛光电薄膜的制备与表征

稀土掺杂BaGdF5纳米晶的合成与光谱特性研究

浅谈新形势下妇产科护理...

浅谈传统人文精神茬大學...

国内外无刷直流电动机研究现状

《醉青春》导演作品阐述

拉力采集上位机软件开发任务书

多元化刑事简易程序构建探讨【9365字】

辩护律师的作证义务和保...

中国古代秘书擅权的发展和恶变

高校网球场馆运营管理初探【1805字】

谷度酒庄消费者回访调查问卷表