模具注塑成型英文文献和中文翻译(2)
Mech 84: 159–190. Copyright 2009.
Figure 5.3 is reproduced with permission from the article by N. Phan-Thien,
X.-J. Fan, R.I. Tanner and R. Zheng, J Non-Newtonian Fluid Mech 103: 251–260.
Copyright 2002.
John Wiley and Sons Inc.
Figure 4.5 is reproduced with permission from the article by J.-F. Luyé,
G. Regnier, P.H. Le Bot, D. Delaunay and R. Fulchiron, J Appl Polym Sci 79:
302–311. Copyright 2001.
Figure 8.6 is reproduced with permission from the article by F. Dupret and
L. Vanderschuren, AICHE J 34: 1959–1972. Copyright 1988.Nova Science Publishers Inc.
Figure 8.11 is reproduced with permission from the article by X.-J. Fan,
R.I. Tanner and R. Zheng, in P.H. Kauffer (ed.) Injection Molding: Process,
Design, and Applications. Copyright 2011.
Sage Science Press
Figures 6.7 and 7.1 are reproduced with permission from the article by
R. Zheng, N. McCafferey, K. Winch, H. Yu, P.K. Kennedy, J Thermoplastic
Compos Mater 9: 90–106. Copyright 1996.
Society of Plastics Engineers Inc.
Figure 1.2 is reproduced with permission from the article by P.K. Kennedy and
R. Zheng ANTEC’2002, 48: 1–7. Copyright 2002.
Figures 5.4 and 5.5 are reproduced with permission from the article by
R. Zheng, P.K. Kennedy, X.J. Fan, N. Phan-Thien, R.I. Tanner, ANTEC’2000, 46:
671–674. Copyright 2000.
Figure 6.9 is reproduced with permission from the article by A. Bakharev,
R. Zheng, Z. Fan, F.S. Costa, X. Jin, P.K. Kennedy, ANTEC’ 2005, 51: 511–515.
Copyright 2005.
Springer Science+Business Media B.V.
Figures 4.1, 4.2, 4.7, 4.8 and 4.9 are reproduced with permission from the
article by R. Zheng, R.I. Tanner, D. Lee Wo, X.-J. Fan, C. Hadinata, F.S. Costa,
P.K. Kennedy, P. Zhu and G. Edward, Korea-Australia Rheol J 22: 151–162.
Copyright 2011.
Thanks are also due to Duane Lee Wo for supplying experimental data which
we have used in Fig. 4.6, Peter Kennedy for Figs. 8.1 and 8.6, Y.-Q. Zheng for
help with drawing Fig. 1.1, and Zhiliang Fan for commenting on Sect. 8.33.1 Introduction 1
1.1 Injection Molding . 1
1.1.1 Injection Molding Machine . 1
1.1.2 Injection Molding Cycle . 1
1.1.3 Feed System 3
1.1.4 The Need for Rheological Information . 3
1.2 Classification of Polymers . 4
1.3 Rheological Characterization of Polymer Fluids 5
1.3.1 Subject and Goals 5
1.3.2 Some Rheological Phenomena . 6
1.3.3 Solidification Rheology 8
1.4 Development of Numerical Simulations
for Injection Molding . 9
2 Fundamentals of Rheology 11
2.1 Introduction to Basic Concepts 11
2.1.1 Kinematics . 11
2.1.2 Viscometric and Extensional Flows 13
2.1.3 Conservation Equations 14
2.2 Constitutive Equations 17
上一篇：塑料注射成型英文文献和中文翻译
下一篇：锤式破碎机的英文文献和中文翻译