work is necessary to fully understand the importance of other Variables.

Acknowledgements

The measurements were carried out at the NCC Ramnasl¨ att Quarry in Southern Sweden. Thomas Gustafsson and the other staff, are gratefully acknowledged. SANDVIK Rock Processing AB is gratefully acknowledged for providing funding, information and support.

References

[1] C.M. Evertsson, Cone Crusher Performance, Ph.D. Thesis, Dept. of

Machine and Vehicle Design, Chalmers University of Technology, Swe-

den, 2000.

[2] K. Gauldie, The output of gyratory crushers, Engineering (October)

(1953) 456–458, October 16, 1953, 485–486.

[3] M. Lindqvist, C.M. Evertsson, Prediction of worn geometry in cone

crushers, Miner. Eng. 16 (12) (2003) 1355–1361.

[4] C.M. Evertsson, M. Lindqvist, Power draw in cone crushers, in: Presen-

tation at the Minerals Engineering Conference, September 25–27, 2002,

Perth, Australia, 2002.

[5] M. Lindqvist, P. Sotkovski, Work hardening in cone crusher liners,

in: Fourth International Conference on Computer Applications in the

Minerals Industries, September 8–10, 2003, Calgary, Alta., Canada,

2003.

[6] M. Lindqvist, C.M. Evertsson, Improved flow- and pressure model for

cone crushers, Miner. Eng. 17 (November–December (11–12)) (2004)

1217–1225.

[7] T. Chenje, P. Radziszewski, Determining the steel media abrasive

wear as a function of applied force and friction, Miner. Eng. 17

(November–December (11–12)) (2004) 1255–1258.

[8] P.P. Rosario, R.A. Hall, D.M. Maijer, Liner wear and perfor-

mance investigation of primary gyratory crushers, Miner. Eng. 17

(November–December (11–12)) (2004) 1241–1254.

[9] J.L. Archard, Contact and rubbing of flat surfaces, J. Appl. Phys. 24 (8)

(1953) 981–988.

[10] M. Lindqvist, C.M. Evertsson, Liner wear in jaw crushers, Miner. Eng.

16 (1) (2003) 1–12.

摘要:   圆锥破碎机广泛应用于粉碎岩石材料，特别是在制造聚合物领域和采矿业。以前相关部门开发过一个用来预测圆锥破碎机的几何磨损的模型。在该模型中，预测的几何磨损和实际测得磨损存在较大差异。针对这种差异，研究人员着力于寻找原因。在这项研究中，`吹冰~文^论|文*网www.chuibin.com我们把重点放在沿破碎表面的剪切力的作用上，同时实验模拟了两个不同的破碎腔以便于比较。结果，测量值和模拟值之间的差异得到显著的改善。测量在粗破碎腔进行，所测试和记录的运行参数包括压力，功耗和容量，且测试时间延续到衬板的寿命到达为止。模拟运行参数与实测数据之间有相当的一致性，但在本实验中破碎机的运行不够稳定和理想。

关键词：粉碎；破碎；模型；磨料磨损；圆锥破碎机。

1.介绍

    圆锥破碎机广泛用于采矿业和制造聚合物领域，用于粉碎爆破的岩石材料论文网。它的两个主要破碎部分是动锥和固定锥。动锥的主轴顶部由向心球面轴承支撑，底部由偏心套连接。液压缸在推力轴承上施加压力以与主轴的推力平衡，同时为了弥补动锥和固定锥的磨损，液压系统可以抬高主轴的高度。 液压缸中与主轴的推力平衡的液压压力叫做hydroset压力。随着偏心轮的运动，岩石材料在动锥和固定锥之间被挤压和粉