The great advantage of the explicit finite element code is that the simulation model of numerous finite elements can be handled, while the disadvantage is the reduced accuracy due to explicit formulation itself. The disad-vantage, however, can be resolved practically by the adoption of fine mesh size  and proper time increment. Even conditionally stable, the explicit code needs low computer memory then implicit scheme and numerical stability may be effectively achieved when weight con-stants and time step size will be properly estimated. Review of literature Endo et al. (2002) carried out a series of crush tests using scale models of the buffer bow. The test results were compared with those obtained by FEA simulation and a simple analysis. Elasto-plastic finite -element analysis was carried out by using FEA program LSDYNA for the cases tested. Naar et al. (2002) com-pared the resistance with damage of various types of double bottom structures in a stranding event. The ship bottom is loaded with a conical indenter with a rounded tip, which is forced laterally into the structures in differ-ent positions. The aim was to compare resistance forces, energy absorption and penetration with fracture for four different structures. Wang et al. (2002) reviewed the state-of-the-art research on collision and grounding. They focuses on the three issues that a standard for design against accidents needs to address: definition of accident scenarios, evaluation approaches, and accep-tance criteria. McDermott et al. (1974) studied the be-haviour of a longitudinally framed oil tanker structure during a minor collision in which the cargo tank re-mains intact, a plastic analysis procedure, based partly on model tests and inspections of collision damage, was developed and applied to a limited number of idealized ship collisions. Kinkead and Mech (1979) studied colli-sions of a severity sufficient to cause spillage of liquid cargoes, they attempted to extend the classical statisti-cally based analysis of Minorsky to the problem of a liquefied natural gas carrier being rammed by a range of conventional ships, that could occur in the confined waters of approach to harbour where community hazard enters the risk scenario. Pedersen et al. (1993) presented a basis for the estimation of collision forces between conventional merchant vessels and large volume off-shore structures in the form of bridges crossing  interna-tional shipping routes and gravity-supported offshore installations. Daidola (1995) reviewed the nature of collision and grounding and identified analysis tech-niques from the literature. Glykas et al. (2001) discussed three failure criteria during a tanker collision takes place. Brown (2002) examined the influence of collision scenario random variables on the extent of predicted damage in ship collisions. Hansen and Simonsen (2002) developed the software providing a toolbox for a multi-tude of analyses related to collision and grounding acci-dents. Lehmann and Peschmann (2002) used the results of large–scale collision experiment to validate numeri-cal calculations of the collision process. Naar et al. [0] compared the resistance against damage of various types of double bottom structures in a stranding casu-alty. The comparative analyses were made by use of a commercial, explicit finite element program. Otto et al. (2002) computed the annual risk of collision and grounding for an example Ro-Ro passenger ferry. Taag (2002) investigated the development of this damage extent distribution based on three independent method-ologies; actual casualty measurements, world fleet bow height statistics, and collision simulation modelling. Paper by Tikka et al. (2002) illustrated an analysis of a large number of hypothetical, but realistic, grounding scenarios, and the application of an approach to study the effect of design modifications on the oil outflow performance. Zhu et al. (2002) considered general sta-tistics of ship grounding incidents and the damage ex-tent distributions for Ro–Ro ships presented from the results of a comprehensive damage data survey con-ducted using Lloyd’s Register’s damage database.
上一篇:舰船玻璃钢夹芯板缺陷和损伤的影响英文文献和中文翻译
下一篇:现金池英文文献和中文翻译

虚拟船舶装配集成建模方...

船舶系泊绞车系统英语文献和中文翻译

船舶操纵仿真方法英文文献和中文翻译

船舶运动仿真系统英文文献和中文翻译

船舶建造规格书英文文献和中文翻译

船舶自动化系统英文文献和中文翻译

船舶系泊定位系统英文文献和中文翻译

压疮高危人群的标准化中...

基于Joomla平台的计算机学院网站设计与开发

浅谈高校行政管理人员的...

STC89C52单片机NRF24L01的无线病房呼叫系统设计

AES算法GPU协处理下分组加...

上海居民的社会参与研究

从政策角度谈黑龙江對俄...

浅论职工思想政治工作茬...

提高教育质量,构建大學生...

酵母菌发酵生产天然香料...