摘要:g-C3N4的光催化能力是很优良的,我们可以研究碳化氮与其他金属化合物复合而成的产物,来探究一下光催化能力是否有所提高,而复合物进行光催化可以优化环境污染物,对环境保护起着优良的作用,我们要研究的是Cu2O,氧化亚铜Cu2O是正八面体结构。复合物g-C3N4/Cu2O是光催化能力较强的复合材料。本论文采用水浴合成的方法制备g-C3N4/Cu2O复合材料,并且是在较低的温度下进行,这样可以使反应能反应充分。合成的g-C3N4是使用三聚氰胺为原料在500 ℃的条件下烧制。最后将g-C3N4与氧化亚铜Cu2O在去离子水中混合在60 ℃进行水浴反应得到所要的复合材料。我们使用X-射线粉末衍射仪、扫描电子显微镜表征、红外光谱来检测我们合成产品的性质及特征。再将以上所用仪器得出的结果进行综合分析, 从而确认得到的g-C3N4/Cu2O复合的材料。碳化氮与氧化亚铜经过复合成为复合物,比较分析之后得到我们想要的产物,复合物g-C3N4/Cu2O使用水浴法的方法合成,从而使我们的产物的光催化性能优良起来。84474

毕业论文关键词:光催化;复合材料;表征;水浴反应

Preparation And Photocatalytic Characterization of Cu2O / g-C3N4 Composite

Abstract: Nonmetallic photocatalytic material g-C3N4 is a good prospect。 Energy structure and excellent thermal stability with a g-C3N4 can be photocatalytic degradation of organic pollutants to become water and carbon dioxide, plays a good role in environmental protection, a monovalent cuprous oxide copper oxide, red or dark red octahedral cubic crystalline powder。 Metal oxides Cu2O and g-C3N4 photocatalytic composite obtained strong composite material。 In this paper, a synthetic method for preparing water bath g-C3N4/Cu2O composites, and at lower temperatures, so that the reaction can be able to respond adequately。 Synthesis of g-C3N4 is a mixture of melamine and urea in the premise under 500 ℃ calcined。 Finally, the g-C3N4 and cuprous oxide mixed in deionized water at 60 ℃ water bath to afford the desired composite material。 Determine the composition of the composite phase by X-ray powder diffraction, scanning electron microscopy to determine the morphology characterization of g-C3N4 /Cu2O composite using infrared spectroscopy to obtain the structure of the complex。 The above results with the results of a comprehensive analysis of the instrument, so that the obtained g-C3N4/Cu2O composite material。 g-C3N4 and metal composite oxide Cu2O, can filter out fine too complex novel photocatalytic materials。 g-C3N4 through a water bath with a metal oxide Cu2O synthesis of a new composite material, photocatalytic properties make it。

Key Words: Photo catalysis; Composite materials; Constant temperature; Water bath

目    录

摘  要 1

引  言 2

1 实验部分 2

1。1 实验试剂和仪器 2

1。2 g-C3N4光催化剂的制备 4

1。3 Cu2O的制备 4

1。4 g-C3N4/Cu2O的制备 5

2 结果与讨论 6

2。1 X-射线粉末衍射仪(XRD)分析 6

2。2 傅里叶变换红外光谱(FT-IR)分析 7

2。3 扫描电子显微镜(SEM)分析 9

3 结  论 11

参考文献 12

致  谢 14

Cu2O/g-C3N4复合物的制备及光催化性能表征

上一篇:加氢脱硫催化剂NiMo/AAC载体的改性
下一篇:纳米WO3的制备及性能研究

不同前驱g-C3N4的制备及光催化性能研究

多级结构复合电极材料的制备工艺研究

重金属污染土壤电动修复试验研究

磁性石墨烯-壳聚糖复合材...

聚吡咯/多壁碳管复合材料的制备及性能研究

羟基磷灰石/二氧化钛复合...

石墨相氮化碳/PVDF复合超滤膜的制备

从企业eHR建设谈管理信息...

《水浒传》中血腥暴力研...

PCI+PID算法直流力矩电机速...

MNL模型历史城区居民活动...

遥感土地用变化监测国内外研究现状

提高小學语文課堂朗读教...

高效课堂教师问卷调查表

浅析施工企业保理融资成...

小型通用机器人控制系统设计任务书

大规模MIMO系统的发展研究现状