壳聚糖/三聚磷酸钠香精微胶囊的制备
毕业论文关键字： 香精；微胶囊；壳聚糖；三聚磷酸钠
Preparation of chitosan / sodium salt sodium phosphate essential microcapsules
Abstract：The yield and efficiency of microencapsulation by complex coacervation are high. In this experiment, chitosan and sodium sodium phosphate were used as composite wall material, liquid jasmine essence as core material, and microcapsules of essence microcapsules were prepared by complex coagulation. And use of biological microscopes, infrared spectroscopy, thermal analysis techniques such as testing essence microcapsules morphology, composition and thermal performance analysis and characterization. Discusses the effect of the single factor conditions such as pH value, emulsifier dosage, core wall ratio and so on the embedding effect of the essential microcapsules. The that the compound wall of chitosan / sodium phosphate can cover jasmine essence, get the spherical solid essence microcapsules. When chitosan / sodium ratio of sodium phosphate was 2:1, the cured PH was 6.5, the emulsifier HLB value 10, core wall ratio of 3:1, the dosage of emulsifier was 5% ,the embedding efficiency of the emulsifier was 38.17% .
Key Words：essence; microcapsule; chitosan; sodium sodium phosphate
目录
1 绪论 1
1.1 微胶囊及微胶囊制备技术 1
1.1.1 微胶囊及微胶囊制备技术概念 1
1.1.2微胶囊化的意义 1
1.2 常用微胶囊化方法概述 1
1.2.1 化学法 2
1.2.2 物理法 2
1.2.3 物理化学法 2
1.3 微胶囊制备中主要影响因素 3
1.3.1 乳化剂的种类和用量对微胶囊的影响 3
1.3.2 壁材的选择对微胶囊的影响 3
1.4 复凝聚法香精微胶囊 3
1.4.1 缓释型香精微胶囊 3
1.4.2 复凝聚法的基本原理 4
1.4.3壳聚糖-三聚磷酸钠复凝聚法（CS-TPP法） 4
1.5 本课题的研究的意义和研究内容 4
2 实验原理和方法 6
2.1 实验原料及仪器 6
2.1.1 实验原料 6
2.1.2 实验仪器 7
2.2 实验原理 7
2.3 实验方法 7
3 实验内容 10
3.1 空白胶囊的制备 10
3.2 乳化剂HLB值对微胶囊制备的影响 10
3.3 乳化剂用量对微胶囊制备的影响 11
3.4 芯壁比对微胶囊制备的影响 11
3.5 体系pH值对微胶囊制备的影响 12
3.6 微胶囊的测试及表征 12
4 实验结果与讨论 14
4.1 微胶囊实验 14
4.1.1壁材配比对微胶囊制备的影响 14
4.1.2 乳化剂HLB值对微胶囊制备的影响 15
4.1.3 乳化剂用量对微胶囊制备的影响 17