摘要虽然多孔阳极氧化铝(PAA)膜作为模板已广泛应用于各种纳米结构的合成,但大面积完整的高分子-氧化铝膜的制备仍面临着诸多挑战。本文在大面积有序PAA膜制备的基础上,结合高分子涂敷工艺,成功地制备高分子-氧化铝复合膜。64136

首先,在草酸水溶液、磷酸乙二醇/水溶液和磷酸乙二醇溶液中进行二次恒流温和阳极氧化,研究在不同电解液中氧化时电压与时间的关系。结果表明,在不同电解液中进行的阳极氧化反应时的U-T曲线的斜率与峰值都有差别。然后,在制得的PAA膜表面涂覆一层高分子溶液制成高分子-氧化铝复合膜,利用逆电剥离法对在三种溶液中二次恒流温和阳极氧化形成的PAA膜进行剥离,研究电解液种类对PAA膜形貌的影响。结果表明,通过该法能得到纳米孔洞阵列有序排列的PAA膜,尤其是在草酸水溶液中孔洞排列相对更规整。

毕业论文关键词:PAA模板,温和阳极氧化,复合膜

毕业设计论文外文摘要

Title  Preparation and Characterization of Macromolecule-alumina composite membrane

Abstract Although the porous anodic alumina (PAA) films have been widely used as a template for the synthesis of nanostructures, but a large area of the complete polymer - Alumina Membrane is still facing many challenges. In this paper, a large area ordered PAA membrane preparation, based on the combination of the polymer coating process, successfully prepared polymer - alumina composite membrane.

   First, an aqueous solution of oxalic acid, phosphoric acid, ethylene glycol / ethylene glycol solution of phosphoric acid aqueous solution and a second constant gentle oxidation, the oxidation of the electrolyte at different voltage-time relationship. The results showed that the different electrolytes for anodic oxidation reaction in the UT has a slope of the curve and the peak difference. Then, the obtained coated film surface PAA polymer solution made of polymer - alumina composite film, by the inverse of the three electric stripping method to the second constant mild solution formed anodization film is peeled PAA research on the type of electrolyte membrane morphology of PAA. The results show that by this method can be ordered arrangement Nanoporous PAA membranes, especially in aqueous oxalic acid solution is relatively more pores in regular arrangement.

Key words: PAA template, moderate anodic oxidation, the composite film 

目录

1  绪论 1

1.1  课题背景及研究意义 1

1.2  PAA模板制备工艺的研究进展 1

1.2.1  PAA膜的制备工艺 1

1.2.2  高分子-氧化铝复合膜的制备 6

1.2.3  高分子-氧化铝复合膜的剥离工艺 8

1.3  本文的主要研究目的及研究内容 11

2  一次阳极氧化 12

2.1  实验部分 12

2.1.1  实验原料和设备 12

2.1.2  一次氧化 13

2.2  一次阳极氧化U-T曲线分析 14

3  二次阳极氧化 17

3.1  实验部分 17

3.2  二次阳极氧化U-T曲线分析 18

4  制备高分子-氧化铝复合膜并表征 22

4.1  制备高分子-氧化铝复合膜

上一篇:PDMC制备工艺的初步研究
下一篇:离子掺杂对上转换材料发光性能的影响研究

多级结构复合电极材料的制备工艺研究

磁性石墨烯-壳聚糖复合材...

聚吡咯/多壁碳管复合材料的制备及性能研究

羟基磷灰石/二氧化钛复合...

石墨相氮化碳/PVDF复合超滤膜的制备

氧化石墨烯-MnFe2O4复合材料...

粘结剂含量对氧化铝支撑体的影响

浅谈传统人文精神茬大學...

高校网球场馆运营管理初探【1805字】

拉力采集上位机软件开发任务书

多元化刑事简易程序构建探讨【9365字】

《醉青春》导演作品阐述

谷度酒庄消费者回访调查问卷表

国内外无刷直流电动机研究现状

中国古代秘书擅权的发展和恶变

浅谈新形势下妇产科护理...

辩护律师的作证义务和保...