摘要各种弹丸飞行姿态参数的获取无论是对弹丸的设计、弹丸空气动力学的研究还是对引信的设计都有着重要的意义,利用弹载传感器精确测量旋转弹体角运动是公认的难题。随着磁传感技术的进步,磁传感器具备了体积小、抗冲击、灵敏度高等特点,可应用于弹体姿态的高速、高精度测量。25821
本文主要研究Thomas E.Harkins和David J.Hepner提出的“MAGSNODE”旋转弹体姿态角测量方法。首先采用matlab建立了该测量方法的数学模型,在此基础上仿真分析了各种误差源对角度测量结果的影响,并以该方法作为理论依据引入了实际的载体坐标系,进行了旋转载体俯仰角测量方法的仿真研究。最后,构建了基于磁通门传感器的实验系验证统,在无磁转台上进行了半实物仿真,验证了方法的可行性。
关键词:地磁探测,姿态角测量,旋转载体,MAGSNODE,零交叉点
毕业设计说明书(毕业论文)外文摘要
Title  Study of rotational attitude angle  based on geomagnetism detection technology                                           
Abstract
Acquisition varieties of projectile flight attitude parameters has an important signification no matter for projectile design,projectile aerodynamics or fuze design.Accurate measurement of angular motion of spinning bodies with onboard sensors has long been recognized as a daunting task.Recent advances in magnetic sensor technologies have yielded devices small enough,rugged enough,and sensitive enough to be useful in system that make high-speed,high-resolution measurements.
This paper mainly studies the measurement method,called a “MAGSONDE”.It is designed at first by Thomas E.Harkins and David J.Hepner.First, the mathematical model of the method is given by the matlab.The error sources of measurement method are analyzed,and with this method as the theoretical basis for actual carrier of the coordinate system is introduced, the simulation research of rotating carrier pitching angle measurement method.The last the feasibility of the system is verified by the experiment system based on fluxgate sensor.
Keywords:geomagnetic exploration,attitude angle measurement,rotaing carrier ,MAGSNODE,zero crossing point
目  录
1 绪论    1
1.1 研究背景及意义    1
1.2 国内外研究概述    1
1.3 本文的研究内容    3
2 零交叉测量方法    5
2.1 引言    5
2.2坐标系的建立与磁传感器输出    5
2.3零交叉测量方法原理    7
2.4 基于matlab软件的仿真    9
2.4.1 单值仿真    9
2.4.2 连续变化的磁方位角仿真    10
2.5 本章小结    11
3 影响因素研究    12
3.1 噪声与滤波器    12
3.1.1 噪声    12
3.1.2 滤波器的设计    12
3.1.3 滤波前后对照    13
3.1.4 不同信噪比下的零交叉测量方法    15
3.2 零位误差    18
3.2.1 以传感器S1(90°)统计时间    19
3.2.2 以传感器S2(60°)统计时间    21
3.3 标度因数误差    21
3.4 安装误差    23
3.5 本章小结    26
4 零交叉测量方法的实际应用    27
4.1 地磁矢量与各坐标系之间的关系    27
4.2 磁传感器的安装方式    29
上一篇:小推力固体火箭发动机中止试验台设计
下一篇:反辐射弹药对雷达目标的毁伤效能评估

MATLAB空气螺旋桨气动推力预估及参数影响分析

基于DEFORM的棒材旋转挤压工艺研究

基于弹性联接的杯形柔轮...

基于瓶颈的生产线动态平衡研究

ANSYS基于舰船的精密冲击防护装置设计

基于MATLAB+ADAMS的电动轮椅的联合仿真研究

基于ADAMS的6L20型柴油机运动仿真研究

小学《道德与法治》学习心得体会

浅谈动画短片《天降好运》中的剧本创作

弹道修正弹实测弹道气象数据使用方法研究

大学生就业方向与专业关系的研究

人事管理系统开题报告

淮安市老漂族心理与休闲体育现状的研究

紫陵阁

组态王文献综述

林业机械作业中的安全性问题【2230字】

适合宝妈开的实体店,适...