摘  要:以实验室保藏的从宋河酒曲中分离出的产酯酵母、产酯霉菌、产酯芽孢菌、乳酸菌为复配菌种,探索酿造酒酯化酶复合菌剂的制备条件。采用透明圈比值法筛选产酯化酶酵母菌、霉菌以及芽孢菌。以酯化酶活性为参考指标,选择混菌比例、接种量、初始pH值以及生长温度为影响因素,通过产酯化酶多元菌株混合发酵产酯酶试验和正交试验确定最优混合固态产酯酶发酵条件。结果表明:单菌、二元菌、三元菌发酵时酯化酶活力最高分别为16.72 U/mL、18.97 U/mL、13.28 U/mL。选取二元菌作为混合产酯发酵菌种,优化发酵条件为芽孢菌和酵母菌混菌比例为4:1、混合菌种接种量为4%、发酵温度为26℃、初始pH值为4.0,酶活力达到最高为22.38 U/mL。7537
关键词:酯化酶;复合菌剂;培养条件
The Exploration of Productive High-yielding Ester Enzyme
by Compound Microbial Agent
Abstract: Taking the ester-producing yeast, mold, bacillus and lactic acid bacteria isolated from Songhe Daqu as trail materials, the producing esterified enzyme ability was studied by multivariate mixed strains during fermenting. The yeast, mold and bacillus were screened by the enzyme activity with the method of transparent circle ratio. The esterifying enzyme activity as a reference index, select the proportions of fungus, inoculation quantity, initial pH value and growth temperature as the influence factors, the optimal fermentation conditions of mixed solid producing esterase was determined by producing esterifying enzyme multi strain mixed fermentation esterase test and orthogonal test. The results showed that the highest fermentation esterifying enzyme activity of single bacteria, binary, ternary bacteria was 16.72 U/mL, 16.72 U/mL, 13.28 U/mL respectively. Select binary bacterium, the optimal fermentation conditions for spore bacteria and yeast mixed bacteria ratio was 4:1, inoculation amount was 4%, the growth temperature was 26 ℃ and initial pH value was 4.0, the highest enzyme activity reached 22.38 U/mL.
Key Words: Esterifying enzyme;Composite agents;Culture conditions目    录

摘  要    1
Abstract    1
引言    2
1.材料与方法    2
1.1 材料    2
1.1.1 菌株来源    2
1.1.2 主要培养基    2
1.2 主要仪器与设备    3
1.3 主要实验方法    3
1.3.1 菌株的活化    3
1.3.1.1 芽孢菌的活化    3
1.3.1.2 酵母菌的活化    4
1.3.1.3 霉菌的活化    4
1.3.1.4 乳酸菌的活化    4
1.3.2 高产酯化酶菌种的筛选    4
1.3.2.1 产酯芽孢菌的筛选    4
1.3.2.2 酵母菌的筛选    4
1.3.2.3 霉菌的筛选    4
1.3.3 种子菌悬液的制备    5
1.3.4 产酯化酶多元菌株混合发酵产酯酶试验    5
1.3.4.1 最佳二元菌混菌比例的确定    5
1.3.4.2 最佳三元菌混合比例的确定    5
1.3.4.3 最佳混菌发酵接种量的确定    5
1.3.4.4 最佳混菌发酵初始pH值的确定    5
1.3.4.5 最佳混菌发酵生长温度的确定    5
1.4 多元菌混合发酵条件的优化    6
1.5 酯化酶活力的测定    6
1.5.1 粗酶液的制备    6
1.5.2 酯化酶活力测定    6
2.结果与分析    6
2.1 酯化酶的分离与筛选    6
2.1.1 芽孢菌酯化酶的分离与筛选    6
2.1.2 酵母菌酯化酶的分离与筛选    7
上一篇:Acidovorax facilis 72W细菌腈水解酶基因的克隆
下一篇:模拟植物光合系统的BiFeO3AgICNTs复合体对大肠杆菌的杀灭效应

偶氮还原酶BC热稳定性的研究

偶氮还原酶BC的脱色性能研究

桑葚白藜芦醇合成酶RS3在酿酒酵母异源表达

桑葚白藜芦醇合成酶RS2在...

基于激子-等离子体激元相...

双酶分步水解麦谷蛋白及酶解产物特性研究

外源酶对桑叶红茶品质的影响

提高教育质量,构建大學生...

STC89C52单片机NRF24L01的无线病房呼叫系统设计

浅论职工思想政治工作茬...

AES算法GPU协处理下分组加...

上海居民的社会参与研究

浅谈高校行政管理人员的...

基于Joomla平台的计算机学院网站设计与开发

酵母菌发酵生产天然香料...

从政策角度谈黑龙江對俄...

压疮高危人群的标准化中...