摘要本论文的主要工作是对干涉滤光片的光谱透过率的进行研究。透过率是指光入射到光学系统的光通量与通过系统后的出射光通量之比,它表示能量在光学系统中传输损失情况,它的大小直接影响到人们观察物体的像的亮度大小。本系统通过计算机控制单色仪,并与氘灯光源组合成波长连续可调光源,以光功率计作为探测器,对200nm至600nm波长范围内的光谱透过率进行相关测量。
本论文首先介绍了有关透过率测量的研究现状和研究意义,其次介绍了透过率测量的有关原理,接着介绍测量系统的总体组成结构,并对组成系统的各部分进行详细阐述,最后通过搭建系统进行实验的测量,分析实验数据,对干涉滤光片的光谱透过率有一个实际了解,并对后续进一步工作做铺垫。27022
关键词  光谱透过率  单色仪  干涉滤光片   光功率计
毕业设计说明书外文摘要
Title    Testing of interference filter spectral transmittance                  
Abstract
The main work of this paper is to study interference filter spectra transmittance. Spectral transmittance is that the radio of transmitted beam luminous flux and incident luminous flux, and it shows the situation of the energy transmission loss in optical system,and the size of transmittance directly affects the size of the brightness of the observation image. The system which consists of monochromator controlled by a computer, and in combination with deuterium light source into a continuous wavelength tunable light source and optical power meter as a detector to achieve the rate of interference filter spectral transmission measurement, and the measured wavelength within the range from 200nm to 600nm.
First this paper describes the significance of the research and the present situation of interference filter spectral transmission measurement, and next introduces the principle of transmittance measurement, then introduces the overall structure of the system mentioned above, and the principles of each sub-pided system. Finally build the system to get the experimental data, analysis the data to have a practical understanding of the spectral transmittance of interference filters, and make a theory basic for the following research.
Keywords  Spectral transmittance;  Monochromator;  Interference filter;   Optical Power Meter
目录
1  绪论    1
1.1  研究的意义和目的    1
1.2  国内外研究现状    1
1.2.1  国内研究现状    1
1.2.2  国外研究现状    1
1.3  研究背景    1
1.4  本文的主要研究内容    2
2  干涉滤光片光谱透过率相关介绍    3
2.1  干涉滤光片理论基础    3
2.2  光谱透过率测量原理    6
3  光谱透过率测试系统组成    8
3.1  71LD30氘灯光源    8
3.2  单色仪    9
3.2.1  单色仪的结构与性能参数    10
3.2.2  单色仪分光原理    11
3.3  光功率计    14
3.4  控制程序    16
3.4.1串口通信    16
3.4.2  RS-232C接口    17
3.4.3  单色仪与光功率计的控制    20
3.5  本章小结    23
4  实验数据分析与总结    24
4.1  实验数据分析    24
4.2  本章小结    35
结  论    37
上一篇:基于FPGA的激光器电源PMBus总线接口设计
下一篇:波导空间功率合成器的仿真设计

基于相关滤波器的长期跟踪算法研究

X波段微带滤波器设计

等波纹最佳逼近FIR数字滤波器设计

LABVIEW虚拟FIR数字滤波器的设计

基于MATLABGUI的粒子滤波算法实现+源代码

基于MATLABGUI的非线性卡尔曼滤波实现

电源EMI滤波器研究ADS仿真

辩护律师的作证义务和保...

拉力采集上位机软件开发任务书

浅谈传统人文精神茬大學...

高校网球场馆运营管理初探【1805字】

国内外无刷直流电动机研究现状

多元化刑事简易程序构建探讨【9365字】

浅谈新形势下妇产科护理...

中国古代秘书擅权的发展和恶变

《醉青春》导演作品阐述

谷度酒庄消费者回访调查问卷表