摘    要 旋转磁场对金属凝固组织和性能有显著的影响。 本文利用电动机的定子和调压变阻器自制了一套简易的旋转磁场装置,用来研究对铜合金凝固组织的影响,采用的工艺参数有浇注温度、 旋转磁场强度、旋转磁场搅拌时间。 实验结果表明:自制的旋转磁场装置能满足实验要求。铜锡合金熔液浇注时,搅拌时间和旋转磁场强度起了较大作用。同样的旋转磁场强度下,搅拌时间越长,得到的晶粒越细小,铜锡合金的硬度越大,性能越好。在相同的浇注温度和搅拌时间下,随着旋转磁场强度的增加,得到铜锡合金晶粒细化得越好,其硬度越大,性能更优越。较佳的旋转磁场搅拌工艺参数为:旋转磁场强度200V,搅拌时间20S。 57153
毕业论文关键词:旋转磁场;磁场强度;搅拌时间 Effect of rotating magnetic field on Cu-Sn alloy solidification structure Abstract Rotating magnetic field had  good effect on alloy solidification structure  and property. This paper researched on the effect of rotating magnetic field on Cu-Sn alloy solidification structure  by the self-made simple rotating magnetic field equipment consisting of electromotor determinant and pressure regulator.  The  measuring parameters were  the  pouring  temperature, magnetic field intensity and  stirring  time and magnetic field intensity. The experimental results  showed  that  self-made simple rotating magnetic field equipment can meet experiment requirements and stirring time and magnetic field intensity have play  important role in Cu-Sn alloy pouring process. The conditions  for Cu-Sn alloy are as followed: at  the same magnetic field intensity, the stirring time was longer, the size of grain was smaller, the grain boundary spacing was smaller, the alloy can get better rigidity and property. When the temperature and time of pouring were instant, the magnetic field intensity was larger, the grain refining was better, the alloy can get better rigidity and property. The better preferable rotating  magnetic field technological parameters: the rotating magnetic field intensity was 200V, the stirring time was 20S. Key words: rotating magnetic field; magnetic field intensity; stirring time   

目  录 

1.前言  1 

1.1 旋转磁场应用研究进展  ....  1 

1.1.1 电磁搅拌装置的分类  ..  1 

1.1.2 电磁搅拌装置的工作原理  ...  1 

1.1.3 电磁搅拌装置对金属组织和性能的影响  ...  1 

1.2 旋转磁场装置的工作原理    2 

1.3 旋转磁场装置对金属凝固组织的作用机理  .  2 

1.4 旋转磁场对金属凝固组织的影响 ..  3 

1.5 高速铁路所用接触线的研究进展 ..  3 

1.5.1 高速铁路常用接触线的种类和特点  ..  3 

1.5.2 不同元素对铜合金接触线性能的影响...  4 

1.5.3 高速铁路用接触线的生产工艺    4 

1.6 选题的目的和意义 ..  4 

1.7 课题研究的内容和目标  ....  5 

1.7.1 研究内容...  5 

1.7.2 研究目标...  5 

2.实验  6 

2.1 实验材料  ....  6 

2.2 实验方案  ....  6 

2.2.1 旋转磁场装置的设计和制造  ....  6 

2.2.2 浇注温度对铜锡合金凝固组织和性能的影响    6 

2.2.3 旋转磁场强度对铜锡合金凝固组织和性能的影响  ..  7 

2.2.4 旋转磁场的搅拌时间对铜锡合金凝固组织和性能的影响  ....  7 

上一篇:苯工质作用下电场对气泡的作用
下一篇:泰勒公式在数学分析中的应用

不同工质作用下电场对汽泡的作用

ABAQUS陶瓷层结构对热障涂...

次口径旋转弹发射技术研...

dynaform压边力对深锥形件成形性能的影响分析

晶体Si中60°位错缺陷对Li输运性质的影响

低温退火对锆合金腐蚀行为的影响

利用FDTD对金属纳米颗粒的...

上海居民的社会参与研究

STC89C52单片机NRF24L01的无线病房呼叫系统设计

提高教育质量,构建大學生...

浅谈高校行政管理人员的...

压疮高危人群的标准化中...

从政策角度谈黑龙江對俄...

基于Joomla平台的计算机学院网站设计与开发

浅论职工思想政治工作茬...

AES算法GPU协处理下分组加...

酵母菌发酵生产天然香料...