摘要:物联网技术发展极其迅速,目前已涉及到农业、食品安全、智能交通、电力系统等各个行业。每一个完整的物联网产品都是在智能网关的综合控制和管理下进行工作,所以物联网智能网关在整个系统中尤为重要。然而国外的物联网却领先国内将近10年的技术水平,国内物联网的发展正在如火如荼地进行,智能网关能够实现的功能和技术点是体现国内物联网发展水平的重要体现。
本文首先介绍了智能网关设计的总体构架并对软硬件的选型和功能实现作了详细介绍,主要运用到的硬件设备有W5500芯片、CC2530芯片、51单片机等,其中51单片机是调试硬件;操作系统为OSAL,运用到Zigbee-Stack协议。23950
毕业论文关键词: 物联网;网关;W5500;CC2530;Zigbee-Stack
Study on the design of intelligent gateway of the Internet of things
Abstract: Interact of things over the Interact based on the concept put forward is to extend and expand its client between any goods and goods to the exchange of information and communication of a network concept.The further development of networking technology,in fact,promotes seamless interactive technology.The so-called seamless interaction,that is,the full realization of the computer design of the digital world and physical world is tightly integrated way.
This article first introduces lightweight protocols and embedded operating system,Z-Stack
,the establishment of a standardized,open network server architecture,its architectural style is based on the most basic of network protocol has able to send short messages,radio-- Subscribe to the mechanism and the authentication mechanism and the protection of data security and other functions,is also a lightweight,scalable and good,open—ended.Then the test platform, successfully transplanted to W5500 within the protocol. Again, for wirelesssensor CC2530 and connectivity,and with the Internet connectivity was proposed design idea and made a test lab.Finally,in the above experiment is proposed based on test platform based on the external hardware circuit design ideas and hardware circuit design.
Key Words: Internet of things;gateway protocol;W5500;CC2530;Zigbee-Stack
目  录
1 绪论    3
1.1 研究背景    1
1.2 国内外研究现状    1
1.3 本课题设计思路及方法    2
2 物联网智能网关设计的一般方案    4
3 相关硬件设计    6
3.1 以太网芯片的选择    6
3.2 物联网主控芯片的选择    8
3.3 调试工具的选择    10
4 相关软件设计    11
4.1 Z-Stack体系架构    11
4.2 Z-Stack软件架构    12
5 连通性测试    13
5.1 物联网与51单片机的连通性测试    13
5.2 51单片机和W5500的连通性测试    13
5.3 51单片机和PC的连通性测试    14
5.4 移植后PC和CC2530的连通性测试    14
5.5 各个软件模块功能的实现    16
5.5.1 网关向物联网节点发送信息    16
5.5.2 网关接收物联网节点信息    16
5.5.3 网关接收以太网信息    17
5.5.4 网关向以太网发送信息    17
5.5.5 以太网与物联网格式转换    17
5.6 联合调试及问题修正    17
6功能测试和应用实例    18
6.1 继电器远程控制    18
6.2 物联网传感器数据远程返回    18
7 总结与展望    19
致  谢    21
参考文献    22
上一篇:基于Rockwell PLC的加热炉控制系统设计
下一篇:中低压配电网故障定位方法的研究

PLC物料自动分拣系统的设计+源程序

基于数字图像处理的作物颗粒统计系统设计

zigbee居家燃气泄漏安全报警提示控制系统设计

基于ZigBee的智能呼叫医护系统设计与实现

基于生物启发神经动力学...

ARM的ZigBee温控系统的设计

ZigBee+WSN水产养殖水质多参数监测系统设计

浅析施工企业保理融资成...

《水浒传》中血腥暴力研...

从企业eHR建设谈管理信息...

高效课堂教师问卷调查表

提高小學语文課堂朗读教...

MNL模型历史城区居民活动...

小型通用机器人控制系统设计任务书

大规模MIMO系统的发展研究现状

PCI+PID算法直流力矩电机速...

遥感土地用变化监测国内外研究现状