摘要如今,高新科技产品正在快速地崛起,由于路灯对人们的生活影响颇大,其监控系统的发展也越来越受人们的关注。传统监控系统的布线过于复杂,而且一旦发生了故障,只能通过路人上报或者靠定期维修的工作人员发现。路灯监控系统中,控制方式单一、联网困难等问题迫切需要解决。74058

本设计采用单片机技术、GPRS技术和ZigBee技术,设计出一套由路灯终端、监控终端和监控管理中心组成的路灯监控系统。设计中路灯终端可以采集路灯的状态,路灯的状态经过ZigBee模块再传送给监控终端,监控终端主控制器将处理以后的数据由GPRS模块传送给监控管理中心,并在管理中心的界面中显示,从而实现路灯的远程监控。另一方面,终端或者监控中心上位机界面发送命令,GPRS模块实现接收功能,监控终端里面的主控制器可以对命令进行处理,再将控制命令通过ZigBee模块发送给路灯终端,从而实现路灯的远程控制。本系统中不仅设计了硬件部分还编写了软件流程,各部分基本上可以达到系统预设定的目的。

毕业论文关键词:路灯控制系统  物联网  GPRS  ZigBee  远程监控

Design of Street Lamp Monitoring System Based on Internet of Things

Abstract Nowadays, high-tech products are rapidly rising, and the development of the monitoring system has become more and more popular because of the influence of the street lamps on people's life。 The wiring of the traditional monitoring system is too complicated, and once a fault occurs, it can only be reported by passers-by or be  found by regular maintenance staffs。 Street lamp monitoring system, control mode is single, networking difficult issues such as the urgent need to solve。 

    This design uses the single chip technology, GPRS technology and ZigBee technology, designed by a street lamp terminal, monitoring terminal and monitoring management center consisting of street lamp monitoring system。 Design of road lamp terminal can collect the status of street lights, street lamp state through ZigBee module is then transmitted to the monitoring terminal, monitoring master controller of the terminal will dealing with the data by the GPRS module to transmit to the monitoring and management center and in the management center of interface display, so as to realize the street lamp remote monitoring。 On the other hand, the terminal or monitoring center PC interface to send commands and GPRS module realization of receiver functions, the monitoring terminal inside the main controller can be on the order processing, and control commands sent by the ZigBee module to the street lamp terminal, so as to realize the street lamp remote control system。 In this system, not only the hardware part but also the software flow is designed。 Each part of the system can achieve the goal of the system。 

Key words:  Street lamp control system  Internet of things  GPRS                                                                                 

ZigBee   Remote monitoring   

目  录 

摘  要 I

Abstract II

目录 III

图清单 V

表清单 VI

1 绪论 1

1。1路灯照明的现状与发展 1

1。2物联网技术介绍

上一篇:Qi标准手机无线充电装置的设计+电路图
下一篇:工频故障分量的距离保护研究+MATLAB程序

PLC物料自动分拣系统的设计+源程序

基于数字图像处理的作物颗粒统计系统设计

zigbee居家燃气泄漏安全报警提示控制系统设计

基于ZigBee的智能呼叫医护系统设计与实现

基于生物启发神经动力学...

ARM的ZigBee温控系统的设计

ZigBee+WSN水产养殖水质多参数监测系统设计

小型通用机器人控制系统设计任务书

提高小學语文課堂朗读教...

从企业eHR建设谈管理信息...

遥感土地用变化监测国内外研究现状

大规模MIMO系统的发展研究现状

浅析施工企业保理融资成...

PCI+PID算法直流力矩电机速...

MNL模型历史城区居民活动...

高效课堂教师问卷调查表

《水浒传》中血腥暴力研...