基于组态技术的CAN总线仿真研究
关键词 CAN总线 组态王 仿真研究
毕业设计说明书（论文）外文摘要
Title Simulation of CAN Bus Based on Configuration technology
Abstract
This article mainly uses the box of iCAN teaching experiment to do simulation research about CAN bus by kinds of testing and simulation software .First we use the CAN protocol analysis tools to test iCAN modules:estabishing the connection and deleting the connection between the modules, the test on functions. then through the configuration software (configuration) to achieve the following functions: the communication between various CAN modules, the simulation control of the CAN modules, including the input and output of the switch, the input and output of the analog, the detection of temperature and humidity, the detection of frequency and the detection and control of the CAN network. This article also carried out a detailed introduction and description of the simulation control process.
Keywords CAN bus king view simulation research
目 次
1 绪论 1
1.1 课题研究背景 1
1.1.1 CAN总线综述 1
1.1.2 CAN总线特点 1
1.1.3 CAN总线发展前景 2
1.2 本文的结构安排 2
2 相关软硬件介绍 2
2.1 iCAN实验箱综述 2
2.1.1 实验箱概述 2
2.1.2 iCAN系列功能模块 3
2.1.3 CANalyst-II分析仪 3
2.2 CAN总线测试及连接软件 4
2.2.1 iCANtest 软件简介 4
2.2.2 ZLGCANtest软件 4
2.2.3 ZOPC_server软件简介 4
2.3 组态软件（组态王）简介 4
2.4 本章小结 4
3 iCAN 协议规范应用 5
3.1 iCAN-4050模块iCAN通信 5
3.2 iCAN-4017模块iCAN通信 6
3.3 iCAN-4400模块iCAN通信 7
3.4 iCAN-5303模块iCAN通信 8
3.5 iCAN-7202模块iCAN通信 10
3.6 本章小结 11
4 iCAN功能模块应用 11
4.1 开关量输入、输出 11
4.2 模拟量输入 12
4.3 模拟量输出 13
4.4 热电阻输入 14
4.5 脉冲输入 15
4.6 相关传感器 16
4.6.1 超声波传感器 16
4.6.2 煤气传感器 16
4.6.3 温、湿度传感器 17
4.6.4 模块上线 17
4.7 直流电机速度调节及转速测量 18
4.8 本章小结 19
5 组态应用仿真研究 19
5.1 基于组态王的开关量输入、输出 19
上一篇：基于51单片机数字多用表的设计