摘要:伴随着锂离子电池的呈现与高速成长,锂离子二次电池与人类的各项成长息息相关。锂离子电池的发现直到今天,人类一直在研究怎样加强改善现有电池的水平,更新现有的电池材料。正极材料作为锂离子电池的主要组成部分,它是决定电池性能优劣的主要因素。三元正极材料是直到现在最具备发展前景的、最有希望成为锂离子动力电池的创造材料。本文中研究了LiNi0.8Co0.1Mn0.1O2材料的制备过程当中元素的掺杂对材料各项机能的影响,并优化出最好的反应工艺所需要的条件。

研究了Ti掺杂量对三元正极材料进行不同比例的掺杂,Ti含量分别为0.45,0.5,0.55,0.6,0.7,0.8。将这几种不同的Ti掺杂量进行各项测试比较分析结果,综合分析后Ti的不同掺杂量对三元正极材料有不同影响。

关键字:Li(Ni0.8Co0.1Mn0.1)O2;掺杂改性;电化学性质;

Abstract:With the emergence and rapid development of lithium-ion batteries,lithium-ion secondary batteries are closely related to the development of mankind.From the discovery of lithium-ion batteries,humans have been studying how to improve the level of existing batteries and innovate the existing battery materials.The cathode material is an important part of the lithium-ion battery,which is an important factor in determining the battery performance. The ternary cathode material is the most promising material for lithium ion battery production up to now. In this paper, the effect of element doping on the properties of the material during the preparation of LiNi0.8Co0.1Mn0.1O2 material was studied, and the optimum reaction conditions were optimized.

The doping amount of Ti was used to dope different proportions of ternary positive electrode materials.The Ti content was 0.45,0.5,0.55,0.6,0.7,and 0.8, respectively.These different kinds of Ti doping amount were compared and analyzed by the results of various tests. After comprehensive analysis, different doping amounts of Ti had different effects on the ternary positive electrode materials.

KeyWords:Li(Ni0.8Co0.1Mn0.1) O2;Doping modification;Electrochemical properties;

1绪论 1

1.1引言 1

1.2锂离子电池正极材料的研究现状 1

1.3锂电池正极材料的优缺点 1

1.3.1锂电池正极材料的优点 1

1.3.2锂电池正极材料的缺点 2

1.4锂离子电池的结构 2

1.5锂离子电池的正极材料的介绍 3

1.5.1 LiCoO2 3

1.5.2 LiNiO2 4

1.5.3其他正极材料 4

1.6锂离子电池的工作原理 5

1.7三元材料的制备方法 6

1.7.1 高温固相法 6

1.7.2 化学共沉淀法 6

1.7.3 溶胶凝胶法 7

1.7.4 喷雾干燥法 7

1.8研究课题的内容及意义 7

2实验方法 8

2.1实验原料和化学试剂 9

2.2实验仪器与设备

上一篇:氧化锆场效应晶体管制备及性能
下一篇:碳掺杂对材料电化学性能的改性研究

脉冲电流参数对铝及镁合...

造纸白泥环保滤料的性能...

应变量对高压切变复合管...

金属界面有机分子吸附结构和稳定性的调控

热处理对γ-TiAl基合金的晶界工程研究

Cu-V复合填充层对钢/铌激光...

高性能二维过渡金属硫化...

流动人员人事档案信息化...

第三方支付风险防范文献综述和参考文献

机械安全标准国内外研究现状

80C51单片机水箱液位控制系...

ARM新生儿水床控制系统设计硬件设计+源代码

浅析地籍档案的信息化管理【2143字】

内河智能航运信息服务(...

城镇化进程国内外研究现状

超声波自动测量物体液位系统设计任务书

反转课堂在小学数学教学...