摘要为了解决TiO2难以响应太阳光的问题,本实验采用了上转换发光剂复合材料的方法对TiO2光催化进行了改性。制备上转换发光剂和TiO2粉体都成粉末状,在降解有机污染溶液体系中难以回收,并对降解水域体系造成二次污染,本实验采用活性炭纤维(ACF)负载上转换发光剂形成复合材料,对催化材料进行固定,与此同时活性炭纤维自身也有吸附有机污染物的功能,这样就解决了光催化剂难回收,实现了吸附剂的原位再生。课题对实验所制备的ACF负载上转换发光剂复合材料进行表征,并对其光降解性能,稳定性等进行评估。通过降解亚甲基蓝溶液,改变环境影响因素,探究ACF负载上转换发光剂复合材料具体的降解性能,回收利用率等。44989
关键词:光催化 上转换发光剂 降解性能 活性炭纤维
毕业论文设计说明书中文摘要
Title  Preparation and Photocatalytic Degradation about Upconversion
       Agent and Carbon Fiber Material Supported Research                                 
Abstract
To solve the problem of TiO2 is difficult to respond to the sunlight, the present study, this experiment adopted the method of upconversion luminescence agent composite of TiO2 photocatalytic. Preparation of the upconversion luminescence agent and TiO2 are powder, they are difficult to recover in the degradation of organic pollution solution system and may have secondary pollution.ln this experiment, actives carbon fiber(ACF) was used to support conversion luminescent agent. It loaded up catalytic material. At the same time, activated carbon fiber also has the function of adsorption of organic pollutants, this would resolve the photocatalyst that is difficult to recycle. The regeneration of adsorbent was realized. The ACF loading up conversion luminescent agent composite was characterized. and evaluate the performance and stability of the optical degradation. By degradation of methylene blue solution, changing environmental factors, to explore the luminescent agent composite material of carbon fiber-conversion load of concrete degradation and recycling utilization.
Keywords  photocatalytic  upconversion luminescence agent  degradability  activated carbon fiber composite material
目  次
1  绪论    1
1.1  光催化剂TiO2概述    1
1.2  上转换材料概述    4
1.3  活性炭纤维(ACF)的应用    5
1.4  本课题的研究目的与主要内容    6
2  材料制备与表征    7
2.1  材料的制备过程    7
2.2  样品的XRD分析    10
2.3  红外光谱分析    11
2.4  样品的SEM分析    12
2.5  荧光光谱分析    13
2.6  本章小结    14
3  材料光催化性能研究    15
3.1  实验方案与标准曲线    15
3.2  材料的对比实验    16
3.3  初始浓度的影响    17
3.4  光照强度    18
3.5  回收利用分析    19
3.6  降解反应动力学分析    20
3.7  本章小结    21
4   结论与展望    22
4.1 本文结论    22
4.2 本文的创新点    22
4.3 后续研究的建议    23
致  谢    24
参考文献    25
1  绪论
上一篇:基于α-异氰乙酸酯的串联反应构建天然产物关键骨架的研究
下一篇:热拉伸处理对聚酰亚胺薄膜性能的影响研究

脉冲电流参数对铝及镁合...

高弹性掺氮泡沫碳/纳米...

高稳定性层状Birnessite-Li...

激光液相烧蚀法制备纳米材料过程与机理研究

网状结构Fe-Al基复合材料的制备及性能研究

透明电子材料和器件的制备

生物质纳米材料的结构和物理性能

高校网球场馆运营管理初探【1805字】

谷度酒庄消费者回访调查问卷表

浅谈新形势下妇产科护理...

辩护律师的作证义务和保...

多元化刑事简易程序构建探讨【9365字】

拉力采集上位机软件开发任务书

浅谈传统人文精神茬大學...

《醉青春》导演作品阐述

国内外无刷直流电动机研究现状

中国古代秘书擅权的发展和恶变