本课题分别采用溶胶一凝胶法和共沉淀法两种方法制备了 Y2-xPrxSiO5 上转换荧光粉。采用 X 射线衍射(XRD)、扫描电镜(SEM)、红外光谱、粒径仪、荧光光谱对制备的样品进行了表征。  探讨了不同煅烧温度对样品晶型的影响,XRD 数据结果表明:溶胶一凝胶法制备的样品在 900—950℃会发生晶型转变,而共沉淀法制备的样品在 800—900℃会发生晶型转变。同时,探讨了不同掺杂量对上转换荧光发光效果的影响,结果表明:当 Pr3+掺杂量为1%时荧光强度最强。而不同 Y:Si比对样品晶型的影响,结果表明当 Y:Si比为 2:1 时所得的样品为高纯度的 Y2SiO5。 采用荧光光谱对二种不同制备方法的荧光粉进行了表征,研究表明,溶胶—凝胶法制备的上转换荧光粉的荧光强度较共沉淀法制备荧光粉有较好的上转换发光效果。8953
关键词  上转换  纳米材料  共沉淀法  溶胶—凝胶法  Title: Title: Title: Title: Study on the preparation of up-conversion environmental
functional nano-materials  
Abstract Abstract Abstract Abstract: :: :      
In this work,Y2-xPrxSiO5 up-conversion phosphor has been prepared by sol-gel
process and co-precipitation method, respectively X-ray diffraction
(XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR),
particle size analyzer, and fluorescence spectroscopy have been employed
to characterize the properties and performances of  Y2-xPrxSiO5 up-conversion
phosphor
The influence of different calcination temperature  on phase change was
studied, XRD data results showed that phase change  of the samples prepared
by the sol-gel method occurred  in the 900-950°C, and the impact of the
different ratio of Pr3+ to Y2SiO5 on photoluminescence (PL) intensity was  
also discussed, the results showed that 1% the doping amount of Pr
3+ had
the strongest fluorescence intensity; comparably,  phase transition of  
co-precipitation prepared samples  was occurred about in the 800-900°C;
different ratio of Y to Si can affect the phase of  the sample ,the results
studied on this showed that, when ratio of Y to Si  was 2:1, sample prepared
by this mean was of high purity Y2SiO5
The phosphors synthesized by the two kinds of different methods were
characterized by fluorescence spectroscopy (FS), the results showed that
the phosphors prepared by sol-gel method had a better photoluminescence
(PL) intensity than that prepared by co-precipitation method
 Keywords   Up-conversion  Nanometer Materials  Co-precipitation  
Sol—gel 目  次
 
目次     ..Ⅰ ⅠⅠ Ⅰ
1   引言..1
1.1  纳米上转换环境功能材料研究状..1
1.2 上转换材料的制备方法.4
1.3  上转换材料的应用6
1.4  本课题的研究目的7
1.5  本课题研究内容.8
2   溶胶—凝胶法制备样品及表征.9
2.1  试剂与仪器9
2.2  溶胶—凝胶法制备样品 Y2SiO5:Pr
3+
.9
2.3  样品 Y2SiO5:Pr
3+
的表征.9
2.4本章小结.14
3   共沉淀法制备样品及表征16
3.1 共沉淀法制备样品 Y2SiO5:Pr
3+
..16
3.2  样品 Y2SiO5:Pr
3+
的表征.16
3.3   本章小结.22
4   两种方法的比较.23
4.1  两种方法制得上转换荧光粉颗粒的粒径比较.23
4.2 两种方法中煅烧温度对晶型的影响比较23
4.3  两种方法制得上转换荧光粉荧光发光的比较23
结  论..25
上一篇:溶胶凝胶法制备碳纳米管锶铁氧体纳米复合材料的结构和磁性能
下一篇:高活性纳米二氧化钛的制备表征及光催化分解水制氢研究

高弹性掺氮泡沫碳/纳米...

Cu2O纳米线的制备及其光催化性能研究

纳米碳纤维结构表征及工艺优化

梯度纳米结构纯钛轧制行为研究

激光液相烧蚀法制备纳米材料过程与机理研究

纳米多孔Co的制备及其微观结构研究

RASP纯钛表面获得梯度纳米结构

浅谈新形势下妇产科护理...

辩护律师的作证义务和保...

谷度酒庄消费者回访调查问卷表

高校网球场馆运营管理初探【1805字】

《醉青春》导演作品阐述

拉力采集上位机软件开发任务书

多元化刑事简易程序构建探讨【9365字】

浅谈传统人文精神茬大學...

中国古代秘书擅权的发展和恶变

国内外无刷直流电动机研究现状