摘要:我国无氰电镀铜工艺研究取得了丰硕的成果。已投产使用的有哈尔滨工业大学研究并获国家发明奖的柠檬酸-酒石酸盐镀铜和南京大学为主研究的羟基乙叉二膦酸(HEDP)直接无氰镀铜工艺,经投产实验表明,这两种电解液的成分稳定,分散能力和覆盖能力好,镀层与集体的结合力较强。
本实验旨在研究柠檬酸盐体系下加入其它单一的电镀辅助络合剂来得到表面细致,镀层与基体结合力较强的工艺配方。然后对该配方进行优化实验,改变各种实验条件和成分含量来得到最佳的工艺配方。31977
经实验得到以下结果:
单一辅助络合剂的柠檬酸盐体系的最佳配方为:柠檬酸钾200g/l,硫酸铜40g/l,胺类化合物50g/l,pH为9-10,温度60℃。此配方得到的镀层表面细致。
毕业论文关键词:碱性镀铜,柠檬酸盐镀铜,辅助络合剂
 Alkaline copper plating technology research
Abstract:Without cyanide copper plating technology research in China has come to a great achievement. The technology studied by Harbin Institute of Technology which won the national award for its salt of citric acid and tartaric acid copper plating and the technology of hydroxy ethyl fork phosphonic acid (HEDP) without cyanide copper plating process directly which is studied by Nanjing University have been put into operation. The production experiments showed that the two kinds of electrolyte composition is stable, dispersion ability and coverage are good, plating and the adhesion strength of the collective is stronger.
The experiment was aimed to study citrate system which is injected other single electroplating auxiliary complexing agent to get a technological formula that the plating surface is meticulous and having a strong binding force between the coat and the substrate. Then, I will have a optimization experiment,changing various experimental conditions and the component content to get the best technology formula.
Through the experiment to get the following results:
Single auxiliary complexing agent system of citrate best formula is: potassium citrate 200g/l, copper sulfate 40g/l, amine compounds 50g/l, pH of 9 to 10,the temperature is 60 ℃. The coating on the surface of this formula is fine.
Key words: Alkaline copper plating,citrate copper plating,auxiliary complexing agent
目  录
1 前言    1
1.1 课题研究的内容、目的    1
1.2 课题的主要技术要求    1
1.2.1 电镀    1
1.2.2 化学镀    2
1.3 无氰碱性电镀铜的研究进展    2
1.3.1 国内进展    2
1.3.2 国外进展    2
1.3.3 应用前景    3
2 柠檬酸盐镀铜体系的工艺原理    4
2.1 电沉积镀铜    4
2.2 柠檬酸碱性镀铜的特点及优势    4
2.3 柠檬酸盐镀铜机理    4
3 工艺实验研究方法及步骤    6
3.1 工艺试验方法    6
3.2 工艺流程    6
3.2.1 基础溶液的配置    6
3.3 工艺性能测定的方法    7
3.3.1 铜镀层外观的检测    7
3.4 主要仪器、试剂、材料等    7
3.4.1实验仪器和设备    7
3.4.2 实验的材料    8
4 工艺研究的结果分析和讨论    8
4.1 无辅助络合剂    9
4.2 不同辅助络合剂对柠檬酸盐体系的影响    10
4.2.1 酒石酸对本实验体系的影响    10
4.2.2 D-葡萄糖酸钠对本实验体系的影响    11
4.2.3 三乙醇胺对本实验体系的影响    12
上一篇:Mannich反应的绿色合成研究
下一篇:溶液介质对铜表面组装膜防变色效果的影响

中空玻璃微球的化学镀铜

高强铝合金厚板搅拌摩擦焊接工艺研究

多级结构复合电极材料的制备工艺研究

4-氟环己酮的制备工艺研究

中药牛角瓜中强心苷类成...

CoCrCuFeNiMnX高熵合金热处理工艺研究

甘蔗渣液态发酵生产赤藓醇的工艺研究

中国古代秘书擅权的发展和恶变

多元化刑事简易程序构建探讨【9365字】

拉力采集上位机软件开发任务书

高校网球场馆运营管理初探【1805字】

辩护律师的作证义务和保...

浅谈传统人文精神茬大學...

谷度酒庄消费者回访调查问卷表

国内外无刷直流电动机研究现状

浅谈新形势下妇产科护理...

《醉青春》导演作品阐述