摘要 本文主要内容为 LED 封装用苯基硅橡胶材料的改性研究,通过在苯基硅橡胶中掺杂硅烷偶联剂改性纳米粒子 TiO2和ZrO2,系统研究了两种纳米粒子及其添加量对苯基硅橡胶的光学性能、电学性能、导热性能等的影响。研究表明:硅橡胶纳米复合材料的折射率随着粒子添加量增加而增加,当纳米TiO2、ZrO2含量为 3wt%时,所制得的纳米复合材料具有较好的折射率,分别为 1.573 和 1.571。改性纳米粒子硅橡胶复合材料的介电常数较未改性纳米粒子硅橡胶复合材料的高。 硅橡胶纳米复合材料的体积电阻率随着粒子的添加量增加而有所增加,当纳米 ZrO2、TiO2的含量为3wt%时,所制得的纳米复合材料具有最高的体积电阻率,添加改性 ZrO2、TiO2 的苯基硅橡胶复合材料的体积电阻率分别从2.6× 1013Ω•cm 左右分别增加到 17.97× 1013和26× 1013Ω•cm。橡胶纳米复合材料的导热率呈现先增加后减小的趋势,当纳米 ZrO2含量为 0.01wt%时而纳米 TiO2的含为 0.6  wt%时,所制得的纳米复合材料具有最佳的导热率,分别为 0.199和0.215W• m-1• K-1。  35973
毕业论文关键词:LED封装;纳米粒子;苯基硅橡胶;纳米复合材料    
Research on Different Contents of PhenylSilicone Rubber Modified with Nanoparticles (TiO2\ZrO2) 
Abstract This article is mainly for a modification of Silicone Rubber nanocomposite materialused as encapsulant for LED packaging, by means of adding Nano-TiO2, ZrO2  surface-modified with silane coupling agent. Then, the mechanical properties, optical properties, dielectric properties, thermal conductivity of silicone rubber nanocomposites were systematically studied.  The research  results showed that  refractive index of the silicone rubber nanocomposites increased with particles content. When the nano TiO2  and ZrO2  content were 3wt%, the prepared nanocomposite kept good refractive index, which was 1.573 and 1.571 respectively.Thedielectric constant ofsilicone rubber nanocomposite withsurface-modified particles particles  increases with particles content  more than the nanocomposite without surface-modified particles.  When nano-ZrO2  and  TiO2  content  were  3wt%, the prepared nanocomposite  kept  the highest volume resistivity.The  volume resistivity  of  silicone rubber composites adding  with  modified ZrO2  and  TiO2increased  from 2.6×1013Ω•cm to 17.97×1013,26×1013Ω•cm respectively.Thermal conductivity of the phenyl silicone rubber nanocomposites increased firstly  and then decreases. when the nano-ZrO2  content  were 0.01wt%,and nano-TiO2  content were  0.6 wt%,  the  prepared nanocomposite  presented  best thermal conductivity, which were 0.199,and 0.215 W•m-1•K-1 respectively.  
Keywords: LED packaging;Nanoparticles; Phenyl silicone rubber; Nanocomposite   
目录
1绪论1
1.1LED简介.1
1.1.1LED封装介绍1
1.1.2LED封装材料的研究意义3
1.1.3LED封装材料的性能要求3
1.2LED封装用材料的研究进展.4
1.2.1环氧树脂.4
1.2.2有机硅改性环氧树脂.4
1.2.3有机硅材料.5
1.3纳米粒子有硅复合材料的研究进展.6
1.3.1TiO2、ZrO2纳米粒子的性质.6
1.3.2无机纳米粒子的表面修饰.6
1.3.3无机纳米粒子在硅橡胶中的应用.8
1.3.4有机硅橡胶/无机纳米复合材料的制备方法8
1.4课题研究的目的和意义.9
1.4.1研究目的.9
1.4.2研究意义.9
2实验部分10
2.1实验用主要原料.10
2.2实验用仪器设备.10
2.3实验过程11
2.3.1纳米粒子TiO2和ZrO2的表面修饰11
上一篇:金属氧化物对水性膨胀型防火涂料防火阻燃性能的影响
下一篇:TiO2纳米粒子在水中分散性的研究

有机无机阻控剂对Pb、Cd的吸附特性及差异

纳米二氧化钛的机械粉碎...

钴基纳米阵列电极设计及表征

二氧化锡纳米微球制备和光催化

纳米脂质载体包覆黄芩苷的性能研究

Fe-TiO2-沸石光催化剂的制备...

液相还原法制备银纳米片和银纳米颗粒

拉力采集上位机软件开发任务书

《醉青春》导演作品阐述

多元化刑事简易程序构建探讨【9365字】

中国古代秘书擅权的发展和恶变

浅谈新形势下妇产科护理...

辩护律师的作证义务和保...

谷度酒庄消费者回访调查问卷表

国内外无刷直流电动机研究现状

浅谈传统人文精神茬大學...

高校网球场馆运营管理初探【1805字】