摘要:碱式碳酸铜(Cu(OH)2•CuCO3)是重要的化工原料,广泛应用在无机、有机、电镀工业、农业和催化领域。超细化后的碱式碳酸铜由于尺寸效应、表面效应等,从而使其不仅在直接使用时拥有良好的理化及表/界面性质,同时作为制备超细粉体氧化铜前驱体,制得的下游产品具有优异的理化性质。本设计研究以企业现有产品氯化亚铜为原料,采用水解法制备微球体碱式碳酸铜小试工艺,对产物结构通过SEM、XRD、IR进行了表征;并依据小试工艺要求,进行概念性生产工艺设计,设计过程中,首先进行主要的物料衡算、热量衡算和设备计算,再根据工艺操作的要求和特点,参照相关工艺的资料,绘制工艺流程图,然后根据工艺计算结构设计的最终数据画出主要设备图,之后再进行设备选型,绘制车间布置图。设技方案以满足安全生产要求、经济合理为原则。62062

毕业论文关键字: 碱式碳酸铜;水解沉淀法;工艺流程图;工艺设计

Ultrafine Powder of Basic Copper Carbonate:Preparation And Production Design

Abstract: Basic Copper Carbonate (Cu (OH)2 - CuCO3) is an important chemical raw material, widely used in inorganic, organic, electroplating industry, agriculture and catalysis. After superfine cupric subcarbonate due to size effect, surface effect, thus making it not only in the use of the direct has good physical and chemical and surface / interfacial properties and also for preparing superfine powder of copper oxide precursor, of downstream products with excellent physical and chemical properties. The design of the study to the company's existing product cuprous chloride as raw material by hydrolysis method preparing microspheres basic copper carbonate scale craft, on the structure of the product by SEM, XRD and IR were used to characterize the; and on the basis of small-scale process requirements, conceptual design of production process, calculation of the design process, first of all to the main material balance, heat balance and equipment, according to the requirements and characteristics of the operation process, with reference to the relevant process information, process flow diagram, and then according to the technological calculation structure design of the final data to draw a map of major equipment, and equipment selection, drawing workshop layout. Technical scheme to meet the requirements of safety production, economic and reasonable as the principle.

Keywords: Basic Copper Carbonate;hydrolysis precipitation method; process flow chart; process design hydrolysis precipitation method;process flow chart;equipment selection

1.引言 1

1.1 超细微球粉体 1

1.1.1 微球粉体的概述 1

1.1.2 微球粉体特征 2

1.2 规则形貌碱式碳酸铜的制备方法 2

1.3原料及产物性质 3

1.3.1 氯化亚铜 3

1.3.2 无水氯化铜 3

1.3.3 碳酸钠 3

1.2.4 碱式碳酸铜 3

2.小试工艺研究及表征 4

2.1 小试工艺研究 4

2.1.1 试剂与仪器 4

2.1.2 主要试剂、中间体及产物的物化性质: 4

2.1.3制备方法及原理 5

2.1.4实验 6

2.2表征 7

2.2.1 X射线衍射(XRD)

上一篇:Ni-Mo-Al-Y-MoSi2镀层的制备
下一篇:铜催化芳基硼酸的氰甲基化和溴化反应研究

中空玻璃微球的化学镀铜

二氧化锡纳米微球制备和光催化

介孔二氧化硅微球的制备及其表面修饰

中空介孔二氧化锆微球的制备及其表面修饰

粉体输送的静电效应与工艺参数的影响研究

单分散二氧化硅微球的合成

Stöber中空介孔二氧化硅纳米微球的制备

多元化刑事简易程序构建探讨【9365字】

辩护律师的作证义务和保...

浅谈新形势下妇产科护理...

拉力采集上位机软件开发任务书

浅谈传统人文精神茬大學...

国内外无刷直流电动机研究现状

《醉青春》导演作品阐述

谷度酒庄消费者回访调查问卷表

中国古代秘书擅权的发展和恶变

高校网球场馆运营管理初探【1805字】