摘 要:本实验用硅烷偶联剂(KH550、KH560、KH570)改性后的凹凸棒土(ATT)为载体,通过原位沉积,结合冷冻干燥、程序焙烧工艺在其表面负载类石墨相氮化碳(g-C3N4)和二氧化钛(TiO2),以制备具有高可见催化性能的ATT-g-C3N4-TiO2复合光催化剂。利用XRD、BET、FT-IR、UV-Vis等手段对样品的结构、形貌及光学性能进行了表征,并以甲基橙作为目标污染物,对ATT-g-C3N4-TiO2进行了光催化性能进行研究。结果表明,ATT-g-C3N4-TiO2的光催化活性明显高于纯的g-C3N4和TiO2。其主要原因归结为ATT、g-C3N4和TiO2的协同效应。接枝的偶联剂不同、C3N4和TiO2质量比例不同时,复合材料的光催化性能不同,当KH560接枝的凹凸棒土、三聚氰胺和TiO2的质量比为1:2:2时,ATT-KH560-C3N4复合光催化剂的光催化活性最高。72515

毕业论文关键词:凹凸棒土,类石墨相氮化碳,二氧化钛,可见光催化

Abstract: In this experiment, a visible-light-driven ATT-g-C3N4-TiO2 catalyst with high photocatalytic performance  was synthesized via an in-situ deposition method and combined with freeze drying and roasting process in the program with g-C3N4 and TiO2 as the active component and silylated- attapulgite(KH550、KH560、KH570) as the support。The structure、morphology and optical property of the photocatalyst was characterized by means of X-Ray diffraction (XRD), BET surface area, Fourier transform infrared spectroscopy(FT-IR) and Ultraviolet visible absorption(UV-Vis) methods。 Besides, The photocatalytic activity of the photocatalyst ATT-g-C3N4-TiO2 was evaluated using methyl orange as the target contaminant。 Results show that, the as-prepared ATT-g-C3N4-TiO2 preswnted higher photocatalytic activity than those of pure g-C3N4 and TiO2。 The high photocatalytic performance of the ATT-g-C3N4-TiO2 composite can be attributed to the synergistic effect of  ATT、g-C3N4 and TiO2。 The kind of silylated coupling agents and the mass ratio of C3N4/TiO2 have effect on its photoactivity。 The highest photocatalytic performance of the ATT-g-C3N4-TiO2 composite can be obtained as the mass ratio of silylated- attapulgite、g-C3N4 and TiO2 was 1:2:2。

Keywords: Attapulgite, g-C3N4, titanium dioxide, visible light photocatalysis

目录

1  前言 1

2  实验部分 1

2。1  实验材料及设备 2

2。1。1  实验材料 2

2。1。2  实验设备 2

2。2  实验步骤 2

2。2。1  凹凸棒土改性 3

2。2。2  凹凸棒土-C3N4的合成 3

2。2。3  凹凸棒土-C3N4-TiO2的合成 3

2。3  材料表征 3

2。4  材料的光催化性能测试 4

3  结果与讨论 4

3。1  材料表征 4

3。1。1  XRD 分析 4

3。1。2  FT-IR 分析 5

3。1。3  形貌分析 6

3。1。4  UV-vis分析 7

3。1。5  BET分析 9

3。2  Att-kh560-C3N4-TiO2的光催化性能研究 10

结论 13

参考文献

上一篇:掺氮石墨烯-Ag纳米复合材料的合成及电催化性能研究
下一篇:盐酸预处理对小麦秸秆沼气发酵效率的影响研究

聚乙烯亚胺修饰凹凸棒石吸附CO2性能研究

异氰酸乙酯修饰凹凸棒土...

纳米MnO2@凹凸棒土的合成及其电容性能的研究

残次凹凸棒土中掺杂氧化铝对膜支撑体的影响

纳米凹凸棒石改性氧化铝...

PVDFTiO2-凹凸棒石复合超滤膜的制备与表征

纳米凹凸棒石改性氧化铝微滤膜的制备

大规模MIMO系统的发展研究现状

从企业eHR建设谈管理信息...

遥感土地用变化监测国内外研究现状

浅析施工企业保理融资成...

高效课堂教师问卷调查表

PCI+PID算法直流力矩电机速...

《水浒传》中血腥暴力研...

MNL模型历史城区居民活动...

提高小學语文課堂朗读教...

小型通用机器人控制系统设计任务书