摘要:金属的磷化处理是一项传统的表面处理技术,是钢铁在磷酸二氢盐,氧化剂,助剂等构成的磷化液中进行处理并在其表面生成几微米厚的磷化膜的过程,包括锌系,锌钙系,锰系和铁系等类型。腐植酸作为磷化溶液中的促进剂具有环境友好的特点。本实验采用单因素实验的方法研究不同磷化溶液温度、不同腐植酸浓度及不同的磷化时间对磷化膜层的表面形貌、膜层的耐蚀性和沉膜厚度的影响,并对各条件下所得到的数据进行分析和讨论,分析和研究腐植酸促进磷化膜形成的机理。本研究通过自制膜研制了一种不含重金属的常温磷化液,该磷化液成膜速度快,磷化膜晶粒迅速细化,其耐蚀性大幅度提高。9829
关键词: 腐植酸;磷化;沉膜厚度;耐蚀性
Humic acid phosphate Application and Mechanism
Abstract: Metal phosphate treatment is a conventional surface treatment technology, the steel in dihydrogen phosphate, oxidizing agents, additives consisting of phosphating solution for processing and generating on its surface a few microns thick phosphate coating process including zinc, Zn-Ca, manganese and iron-based and other types. Humic acid as phosphating solution accelerator environmentally friendly features. In this study, single factor experiment method phosphating solution different temperatures, different humic acid concentrations and different time phosphate phosphate coating surface morphology, corrosion resistance and heavy film thickness was investigated, and the data obtained under the conditions of analysis and discussion, analysis and research to promote humic acid phosphate film formation mechanism. This study developed a home-made films contain heavy metals phosphating solution at room temperature, the phosphating film speed, rapid refinement of grain phosphate coating, the corrosion resistance increased significantly.
Keywords: humic acid,phosphating,film thickness,corrosion resistance
目 录
1 研究的目的和意义1
1.1 腐植酸的概况1
1.2 中低温磷化的概况2
1.3 常温低温型磷化的研究与发展6
1.3.1 常温低温型磷化7
1.3.2 中温型磷化9
1.4 课题的研究目的10
1.5 课题的研究意义10
2 中低温磷化技术原理与现有基础11
2.1 中低温磷化的原理与工艺中存在的问题11
2.1.1 中低温磷化的原理11
2.1.2 工艺中存在的问题12
2.2 现有基础13
3 课题研究的方法与方案14
3.1 研究的方法14
3.2 研究的方案14
3.2.1 工艺试验的方法14
3.2.2 基础溶液配方及操作条件14
3.2.3 磷化液组成的作用及配制方法15
3.2.4 工艺性能的测定方法15
4 主要仪器和原辅材料19
4.1 主要实验仪器19
4.2 主要材料和化工试剂19
5 实验结果与讨论20
5.1 腐植酸的浓度改变对磷化膜性能的影响20
5.2 磷化液温度对磷化膜性能的影响20
5.3 磷化液温度对磷化膜性能的影响21
5.4 其他工艺因素对磷化膜的影响21
6 结论23