摘要超级电容器又称电化学电容器,是一种介于电池与传统静电电容器之间的新型能量储存器件,具有功率密度大、比电容高、瞬间释放电流大、充放电效率高、充电时间短、循环寿命长等特性,近年来受到广泛关注并得到快速发展。超级电容器的性能主要取决于电极材料,因此对于电极材料的研究一直是该领域主要的研究内容。本实验围绕碳纳米管巴基纸/导电聚合物复合电极的制备、导电聚合物对材料形貌和电化学性能的影响及其机理进行了探索和讨论。首先采用抽滤法制备碳纳米管巴基纸,再采用脉冲法制备聚吡咯修饰巴基纸。采用扫描电子显微镜和光学显微镜对材料形貌、成分进行表征;采用伏安循环法、恒电流充放电测试等方法讨论所制备材料用作超级电容器电极的电化学性能。结果表明,聚吡咯修饰的巴基纸其电化学性能有明显提高。9372
关键词  聚吡咯  巴基纸  超级电容器   复合电极
毕业设计说明书(论文)外文摘要
Title    The preparation of the conductive polymer decorated   Buckypaper
Abstract
Supercapacitors known as electrochemical capacitors, have been recognized as a new type of energy storage devices that fill the gap between batteries and conventional capacitors. Supercapacitors have been rapidly developed in recent years due to their high specific capacitance, high power density, a short time of charge, the charge-discharge efficiency and long cycle life. The performance of supercapacitors is largely depended on the electrode materials. As a result, the electrode materials attract a lot of attention around scientist all over the world.Our study is focused on the preparation of the conductive polymer decorated  buckypaper and their effect and mechanism. Firstly , we prepareed the buckypapers by vacuum filtration method and then a pulsed potentio amperometric polymerization was performed in an aqueous to coat polypyrrole(PPy) onto the carbon nanotubes network of buckypaper.The morphology of the buckypaper was obsered with Scan Electron Microscope(SEM),Opitical microscopy characterization was carried out on a Microscope. And the electrochemical measurement,including cyclic voltammetry(CV) and galvanostatic charge/discharge tese were performanced on an Autolab.the result demonsrates that conductive polymer decorated buckypaper can be an excellent candidate electrode materials for high performance supercapacitors.
Keywords  Polypyrrole  buckypaper  Supercapacitor  Composite Electrode
目   次  
1 引言 1
  1.1 超级电容器的简介 1
     1.1.1 超级电容器的概述1
     1.1.2 超级电容器的工作原理1
     1.1.3 超级电容器电极材料的研究现状2
    1.2 碳纳米管巴基纸的简介3
     1.2.1 碳纳米管巴基纸的概述3
     1.2.2 碳纳米管巴基纸的制备4
  1.3 导电聚合物的简介  5
     1.3.1导电聚合物概述5
     1.3.2 导电聚合物的导电原理6  
     1.3.3导电聚合物作为超级电容器电极材料6
     1.3.4  聚吡咯(PPy)7
  1.4本文的研究思路和内容8
 2 实验部分  9
    2.1 CNT巴基纸的制备  9
     2.1.1 药品与仪器9
       2.1.2 CNT预处理9    
       2.1.3 巴基纸的制备10
       2.1.4 聚合物修饰巴基纸的制备10
    2.2 表征与分析10
     2.2.1巴基纸的形貌表征10
上一篇:水热法石墨烯量子点的制备及其表征
下一篇:Φ120/Φ360×320mm四辊轧机辊系变形计算

应变量对高压切变复合管...

Cu2O纳米线的制备及其光催化性能研究

纳米碳纤维结构表征及工艺优化

梯度纳米结构纯钛轧制行为研究

双稳态在肖特基二极管中的应用

激光液相烧蚀法制备纳米材料过程与机理研究

纳米多孔Co的制备及其微观结构研究

《水浒传》中血腥暴力研...

遥感土地用变化监测国内外研究现状

浅析施工企业保理融资成...

PCI+PID算法直流力矩电机速...

从企业eHR建设谈管理信息...

大规模MIMO系统的发展研究现状

提高小學语文課堂朗读教...

MNL模型历史城区居民活动...

高效课堂教师问卷调查表

小型通用机器人控制系统设计任务书